Product Overview

The ACW- Wire Wound Type Common Mode Filter is designed for noise suppression. It utilizes a wire-wound construction to effectively filter common mode noise in electronic circuits. This series is suitable for various applications requiring reliable EMI/RFI filtering.

Product Attributes

• Brand: Meled
• Product Type: ACW- Wire Wound Type Common Mode Filter
• Series: ACW5020-SERIES
• File No.: SP-20103001
• Origin: Not specified
• Material: Core: Ferrite (FENGYIN OR EQ), Wire: P180 Grd1 (ELEKTRISOLA OR EQ), Adhesive: Epoxy Resin (NAGASE OR EQ), Solder: Sn99.3:Cu0.7 (SHENMAO OR EQ)
• Color: Not specified
• Certifications: Not specified

Technical Specifications

Reliability Testing

Operating Temperature: -40 to +125 (Contain Heating coil)

Appearance Inspection: No external defects by visual inspection.

Terminal Strength: After soldering, between copper plate and terminals of coils, push in two directions of X, Y with standing 10N(1.02kg) for 10+/-2 sec. Terminal should not peel off.

Heat endurance of reflow: Refer to soldering profile.

Insulating resistance: Over 100 M at 100V D.C. between wire and core.

Dielectric Strength: Apply at 0.5KV 3mA for 1 minute between wire and core.

Temperature characteristics: Inductance coefficient (0~2,000) 10 / (-40~ +125 )

Humidity characteristics: Inductance deviation within 10%, after 96 hours in 90~95% relative humidity at 40 2 and 1 hours drying under normal condition. A test is made under the above mentioned condition, and it is kept for 2 hours in the normal condition. After that, no mechanical and electrical defect should be found.

Taping Specifications

Reel Dimensions (Unit: mm): 330 (A) x 100 (B) x 13 (C) x 12.5 (D)

Quantity per Reel: 2500 Pcs

Soldering Profile (IR Reflow)