Wire Wound Chip Common Mode Filters
These wire wound chip common mode filters offer a compact and low-profile solution for preventing common mode noise at high frequencies. They are designed for excellent solderability and can operate in temperatures ranging from -40 to +125. Applications include USB2.0 interfaces in PCs and peripheral equipment, small digital AV equipment, and LVDS lines in Note PCs and LCDs, as well as audio lines.
Product Attributes
- Brand: Metal-Lions (inferred from URL)
- Certifications: Hazardous Substance Free Products (F)
Technical Specifications
| Part Number | Common-Mode Impedance Z() at 100MHz | Rated Voltage Vdc(V) | DC Resistance Rdc() Max. | Rated Current Idc(mA) Max. | Insulation Resistance (M)Min. |
| ACM2012-2P-300TF | 30 25% | 450 | 0.20 | 50 | 10 |
| ACM2012-2P-670TF | 67 25% | 400 | 0.25 | 50 | 10 |
| ACM2012-2P-900TF | 90 25% | 400 | 0.30 | 50 | 10 |
| ACM2012-2P-121TF | 12025% | 370 | 0.30 | 50 | 10 |
| ACM2012-2P-161TF | 16025% | 350 | 0.35 | 50 | 10 |
| ACM2012-2P-181TF | 18025% | 330 | 0.35 | 50 | 10 |
| ACM2012-2P-201TF | 20025% | 300 | 0.40 | 50 | 10 |
| ACM2012-2P-221TF | 22025% | 300 | 0.40 | 50 | 10 |
| ACM2012-2P-261TF | 26025% | 300 | 0.40 | 50 | 10 |
| ACM2012-2P-361TF | 36025% | 280 | 0.45 | 50 | 10 |
| ACM2012-2P-601TF | 60025% | 200 | 0.55 | 50 | 10 |
| ACM2012-2P-671TF | 67025% | 150 | 0.60 | 50 | 10 |
| ACM2012-2P-801TF | 80025% | 150 | 0.80 | 50 | 10 |
| ACM2012-2P-901TF | 90025% | 150 | 0.80 | 50 | 10 |
| ACM2012-2P-102TF | 100025% | 150 | 1.30 | 50 | 10 |
| ACM2012-2P-222TF | 220025% | 100 | 2.00 | 50 | 10 |
Dimensions
A: 2.0 0.2 mm
B: 1.2 0.2 mm
C: 1.2 0.2 mm
Land Pattern
Unit: mm
0.4 0.8 1.0 0.4 1.2 2.6
Soldering Specifications
Solder Specifications: Dip pads in flux and dip in solder pot (96.5 Sn/3.5 Ag solder) at 255C 5C. The terminal electrode and the ferrite must not be damaged.
Strength on pc board bending ability: Solder a chip to test substrate, and then laterally apply a strength load 0.5Kg in the arrow direction. The terminal electrode and the ferrite must not be damaged.
Soldering condition: Solder a chip to a test substrate, bend the substrate by 2mm and then return.
Recommendation soldering condition: Apply cream solder to the test circuit board. It is mounted on the recommendation soldering condition.
Reliability Test
High temperature resistance: Temperature: +1252, Applied voltage: Rated voltage, Applied current: Rated current, Testing time: 50012 hours. Measurement: After placing for 24 hours min. insulation resistance: >10(M), DC resistance: standard value inside.
Low temperature resistance: Temperature: -402, Testing time: 50012 hours. Measurement: After placing for 24 hours min.
Thermal cycle: Temperature: -40,+125 kept stabilized for 30 minutes each. Cycle: 100 cycle. Measurement: After placing for 24 hours min.
Humidity: Temperature: +852, Humidity: 90 to 95%RH, Applied current: Rated current, Applied voltage: Rated voltage, Testing time: 50012 hours. Measurement: After placing for 24 hours min.
Vibration: Frequency: 10 to 50 Hz, Amplitude: 1.52 mm, Dimension and times: X, Y and Z directions for 2 hours each.
Packaging
Packaging Form: Material of carrier tape: Polystyrene, Material of cover tape: Polyester. There shall not continuation more than two vacancies of the product.
Cover Tape Peel Strength: The force for tearing off cover tape is 0.1~0.69(N) in the arrow direction at the following conditions: Temperature: 5 ~ 35, Humidity: 45 ~ 85%, Atmospheric pressure: 860 ~ 1060 hpa.
Packing Quantity: 2000 pcs./reel (180 mm reel T type).
Recommended Reflow Pattern
Reflow: until two times. 150 (60sec. Min. 150sec Max.), 217 (10sec. Max.), 255 (5 seconds max. at 260). Natural cooling.
Iron Soldering: Use a solder iron of less than 30W when soldering, do not allow the soldering iron tip directly touch the ferrite body outside of terminal electrode.
2411212332_MetalLions-ACM2012-2P-300TF_C41364528.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
