<
>
Specifications
Inductance @ Frequency:
1.1uH@100kHz
Insulation Resistance(IR):
10MΩ
Operating Temperature:
-40℃~+125℃
DC Resistance(DCR):
40mΩ
Voltage Rating - DC:
50V
Number of Lines:
2
Mfr. Part #:
ACW5040-351T20
Package:
SMD
Key Attributes
Model Number:
ACW5040-351T20
Product Description
Product Overview
The Meled ACW5040-SERIES is a Wire Wound Type Common Mode Filter designed for noise suppression. It offers effective common mode impedance and inductance characteristics, making it suitable for various electronic applications requiring filtering of unwanted signals.
Product Attributes
- Brand: Meled
- Product Type: Wire Wound Type Common Mode Filter
- Series: ACW5040-SERIES
- File No.: SP-18103002
- Version: A
Technical Specifications
| Meled P/N | Common mode Impedance @100MHz () | Inductance (uH) @100KHz/0.1V | Rated Voltage (V) | MAX DCR () | MAX Rated Current (A) | Max. IR (M) MIN |
| ACW5040-191T50 | 190 (Typ) | 0.6(Typ) | 50 | 0.02 | 5.0 | 10 |
| ACW5040-351T20 | 350 (Typ) | 1.1(Typ) | 50 | 0.04 | 2.0 | 10 |
| ACW5040-102T15 | 1000 (Typ) | 2.7(Typ) | 50 | 0.06 | 1.5 | 10 |
| ACW5040-152T10 | 1500 (Typ) | 3.6(Typ) | 50 | 0.10 | 1.0 | 10 |
| ACW5040-302T05 | 3000 (Typ) | 6.0(Typ) | 50 | 0.20 | 0.5 | 10 |
| ACW5040-402T02 | 4000 (Typ) | 8.0(Typ) | 50 | 0.30 | 0.2 | 10 |
Dimensions
| Dimension | Value (mm) |
| A | 4.8 0.2 |
| B | 5.0 0.2 |
| C | 4.5 Max |
| D | 0.8 Typ |
| E | 1.0 Typ |
| F | 2.3 Ref |
| G | 1.6 Ref |
| H | 0.8 Ref |
| I | 1.0 Ref |
Material List
| No. | Item | Description | Supplier |
| 1 | Core | FERRITE | FENGYIN OR EQ |
| 2 | Wire | P180 Grd1 43*2*16.5 | ELEKTRISOLA OR EQ |
| 3 | Adhesive | EPOXY RESIN | NAGASE OR EQ |
| 4 | Solder | Sn99.3:Cu0.7 | SHENMAO OR EQ |
| 5 | Ink | BLACK | BON MARQUE OR EQ |
Taping Specifications
| Reel Dimensions (Unit: mm) | Quantity (Pcs/Reel) |
| A: 330, B: 100, C: 13, D: 16.5 | 1000 |
Reliability Testing
| Item | Description |
| Operating Temperature | - 40 to +125 ( Contain Heating coil ) |
| Appearance Inspection | No external defects by visual inspection |
| Terminal Strength | After soldering, between copper plate and terminals of coils, push in two directions of X, Y with standing 10N(1.02kg) for 10+/-2 sec. Terminal should not peel off. |
| Heat endurance of reflow | Refer to figure soldering |
| Insulating resistance | Over 100 M at 100V D.C. between wire and core |
| Dielectric Strength | Apply at 0.5KV 3mA for 1 minute between wire and core |
| Temperature characteristics | Inductance coefficient ( 0~2,000 ) 10 / ( - 40~ + 125 ) |
| Humidity characteristics | Inductance deviation within 10% , after 96 hours in 90~95% relative humidity at 40 2 and 1 hours drying under normal condition. A test is made under the above mentioned condition, and it is kept for 2 hours in the normal IR Reflow profile. After that, no mechanical and electrical defect should be found. |
2410121727_MetalLions-ACW5040-351T20_C2885951.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
