<
>
Specifications
Capacitance:
6.8uF
Voltage Rating:
400V
Tolerance:
±20%
Mfr. Part #:
EKM685M2GG1BRR
Package:
Through Hole,D10xL12.5mm
Key Attributes
Model Number:
EKM685M2GG1BRR
Product Description
Product Overview
The SAMXON KM Series Aluminum Electrolytic Capacitors are polar, foil-type capacitors designed for use in electronic equipment. These capacitors meet IEC60384 standards and are constructed with a single-ended design, featuring an aluminum case sealed with end seal rubber and a vinyl sleeve. They are suitable for applications requiring reliable performance and stability across a range of temperatures and conditions, as detailed in their extensive testing protocols.
Product Attributes
- Brand: SAMXON
- Series: KM Series
- Construction: Single ended type, aluminum case, PET sleeve
- Origin: MAN YUE ELECTRONICS COMPANY LIMITED
- Certifications: Meets IEC60384 standards
Technical Specifications
| SAMXON Part No. | WV (Vdc) | Cap. (F) | Cap. tolerance | Temp. range() | tan (120Hz, 20) | Leakage Current (A.2min) | Max Ripple Current at 105 120Hz (mA rms) | Load lifetime (Hrs) | Dimension (mm) DL | F (mm) | d (mm) | Sleeve Material |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EKM685M2GG1BRR**R1 | 400 | 6.8 | -20%~+20% | -25~105 | 0.24 | 121.6 | 65 | 2000 | 10X12.5 | 5.0 | 0.6 | PET |
General Characteristics
| Item | Specification |
|---|---|
| Rated voltage (WV) | 6.3, 10, 16, 25, 35, 50, 63, 100, 160, 200, 220, 250, 350, 400, 420, 450 V.DC |
| Surge voltage (SV) | Refer to Table 2 for values corresponding to WV. |
| Capacitance Tolerance | Standard: 20% (Measured at 120Hz, 20 2, 0.5Vrms) |
| Leakage Current | Refer to Table 1 (Measured after 2 min with 1k10 series resistor) |
| tan | Refer to Table 1 (Measured at 120Hz, 20 2) |
| Terminal Strength (Tensile) | 0.5mm and less: 5 N (0.51 kgf); Over 0.5mm to 0.8mm: 10 N (1.0 kgf) |
| Terminal Strength (Bending) | 0.5mm and less: 2.5 N (0.25 kgf); Over 0.5mm to 0.8mm: 5 N (0.51 kgf) |
| Load Life Test | 2000 Hrs at 105 2 with rated ripple current. Criteria: Leakage current within specified value, Capacitance change within 20%, tan 200% of specified value, no electrolyte leakage. |
| Shelf Life Test | 1000 Hrs at 105 2 (no voltage applied). Criteria: Leakage current within specified value, Capacitance change within 20%, tan 200% of specified value, no electrolyte leakage. |
| Surge Test | 1000 cycles of charge (305s) and discharge (5min 30s) with surge voltage. Criteria: Leakage current within specified value, Capacitance change within 15%, tan within specified value, no electrolyte leakage. |
| Vibration Test | 10Hz ~ 55Hz, 1.5mm peak-to-peak amplitude. Criteria: No intermittent contacts, open/short circuit, damage, or leakage. |
| Solderability Test | 2453C, 30.5s. Criteria: Min 95% surface coated. |
| Resistance to Solder Heat | 2605 for 101s or 40010 for 3+0/-1s. Criteria: Leakage current within specified value, Capacitance change within 10%, tan within specified value, no electrolyte leakage. |
| Change of Temperature Test | 5 cycles of -40 (-25) to +105. Criteria: Leakage current within specified value, tan within specified value, no electrolyte leakage. |
| Damp Heat Test | 5008 hours at 402, 90~95% RH. Criteria: Leakage current within specified value, Capacitance change within 20%, tan 120% of specified value, no electrolyte leakage. |
| Vent Test | For products with vent (6.3). Criteria: Vent operates with no dangerous conditions. |
| Maximum Permissible Ripple Current | Refer to Table 1 for frequency multipliers at various rated voltages and frequencies. |
Component Materials
| No. | Component | Material |
|---|---|---|
| 1 | Lead line | Tinned CP wire (Pb Free) |
| 2 | Terminal | Aluminum wire |
| 3 | Sealing Material | Rubber |
| 4 | Al-Foil (+) | Formed aluminum foil |
| 5 | Al-Foil (-) | Etched aluminum foil or formed aluminum foil |
| 6 | Case | Aluminum case |
| 7 | Sleeve | PET |
| 8 | Separator | Electrolyte paper |
2410121552_Man-Yue-Tech-EKM685M2GG1BRR_C238040.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
