SAMXON GT Series Aluminum Electrolytic Capacitors
Product Overview
This specification applies to polar Aluminum electrolytic capacitors (foil type) designed for use in electronic equipment. The SAMXON GT Series capacitors are constructed with a single-ended type, featuring an aluminum case impregnated with electrolyte and sealed with end seal rubber, finished with a PET vinyl sleeve. They are designed to meet IEC60384 standards, offering reliable performance across a wide operating temperature range of -40C to 105C. These capacitors are suitable for general electronic applications where stable performance and durability are required.
Product Attributes
- Brand: SAMXON
- Series: GT Series
- Type: Polar Aluminum Electrolytic Capacitor (Foil Type)
- Construction: Single ended type, aluminum case, PET sleeve
- Standards: Designed to meet IEC60384
- Safety Feature: Safety vent for 6.3
Technical Specifications
| SAMXON Part No. | WV (Vdc) | Cap. (F) | Cap. tolerance | Temp. range() | tan (120Hz, 20) | Leakage Current (A, 2min) | Max Ripple Current at 105 100KHz (mA rms) | Impedance at 20 100kHz (max) | Load lifetime (Hrs) | Dimension (mm) DL | Sleeve |
|---|---|---|---|---|---|---|---|---|---|---|---|
| EGT108M1CG16RR**P | 16 | 1000 | -20%~+20% | -40~105 | 0.16 | 160 | 1210 | 0.060 | 7000 | 10X16 | PET |
Key Characteristics & Tests:
- Rated Voltage (WV): 6.3V to 100V DC
- Surge Voltage (SV): 8V to 125V DC
- Capacitance Measurement: 120Hz, 0.5Vrms, 202
- Leakage Current: Measured after 2 minutes with a 1k resistor
- tan: Measured at 120Hz, 202
- Terminal Strength: Tensile and Bending strength tests specified
- Temperature Characteristic: Tested at -40, 20, and 105
- Load Life Test: 105, rated voltage + ripple current, 7000 hours
- Shelf Life Test: 105, 1000 hours
- Surge Test: 1000 cycles of charge/discharge
- Vibration Test: 10Hz ~ 55Hz, 1.5mm amplitude
- Solderability Test: 2453, 30.5s
- Resistance to Solder Heat: 2605 for 10s or 40010 for 1s
- Change of Temperature Test: 5 cycles of temperature variation
- Damp Heat Test: 90~95% RH at 402 for 5008 hours
- Vent Test: For products with vents (6.3mm)
- Maximum Permissible Ripple Current: Specified with frequency multipliers
Application Guidelines & Precautions:
- Consider effects of operating temperature and frequency on electrical parameters.
- Avoid reverse voltage, over voltage, and excessive ripple current.
- Use appropriate wiring methods for series or parallel capacitor configurations.
- Observe proper mounting, soldering, and cleaning procedures to prevent damage.
- Ensure electrical isolation and proper clearance for pressure relief vents.
- Handle capacitors with care to avoid mechanical or electrical damage.
- Store and use capacitors within specified environmental conditions.
- Follow emergency procedures in case of vent operation.
- Recondition capacitors after long-term storage if leakage current has increased.
- Dispose of capacitors according to local regulations, preferably by incineration after crushing or puncturing.
2509180925_Man-Yue-Tech-EGT108M1CG16RR_C219689.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
