SAMXON KM Series Aluminum Electrolytic Capacitors

Product Overview
This specification applies to polar Aluminum electrolytic capacitors (foil type) from SAMXON's KM Series, designed for use in electronic equipment. These capacitors meet IEC60384 standards and are constructed for reliability. The KM series offers a range of rated voltages and capacitance values, suitable for various electronic applications. They feature a single-ended construction with tinned CP wire leads, an aluminum case, and a PVC/PET sleeve.

Product Attributes

• Brand: SAMXON
• Category: ALUMINUM ELECTROLYTIC CAPACITORS
• Construction Type: Single ended, foil type
• Sleeve Material: PVC/PET
• Lead Wire Material: Tinned CP wire (Pb Free)
• Sealing Material: Rubber
• Case Material: Aluminum
• Separator Material: Electrolyte paper

Technical Specifications

General Characteristics

• Standard Atmospheric Conditions for Measurement: Ambient temperature: 15C to 35C, Relative humidity: 45% to 85%, Air Pressure: 86kPa to 106kPa. For critical measurements: Ambient temperature: 20C 2C, Relative humidity: 60% to 70%, Air Pressure: 86kPa to 106kPa.
• Operating Temperature Range: See Table 1 temperature range (-25C to 105C).
• Rated Voltage (WV) & Surge Voltage (SV): Available for various DC voltages from 6.3V to 450V.
• Capacitance Measurement: Frequency: 120Hz12Hz, Voltage: Not more than 0.5Vrms, Temperature: 202.
• Leakage Current: Measured after connecting with a protective resistor (1k 10) in series for 2 minutes. Refer to Table 1 for criteria.
• tan Measurement: Frequency, voltage, and temperature as per capacitance measurement conditions. Refer to Table 1 for criteria.
• Terminal Strength: Tensile and bending strength tests specified for different lead wire diameters.
• Temperature Characteristics: Tests conducted at various temperatures (-40C, 20C, 105C) to assess tan and leakage current. Impedance ratio at low temperatures also specified.
• Load Life Test: Conducted at 105C 2 with DC bias and ripple current for specified duration. Criteria include leakage current, capacitance change (within 20%), tan (not more than 200% of specified value), and appearance (no electrolyte leakage).
• Shelf Life Test: Storage at 1052 for 1000+48/0 hours. Criteria similar to Load Life Test.
• Surge Test: 1000 cycles of charge/discharge with surge voltage. Criteria include leakage current, capacitance change (within 15%), tan, and appearance.
• Vibration Test: Applied for 2 hours in 3 mutually perpendicular directions within specified frequency and amplitude. Criteria include no intermittent contacts, open/short circuits, or damage.
• Solderability Test: Soldering temperature 2453, dipping depth 2mm, dipping speed 252.5mm/s, dipping time 30.5s. Minimum 95% surface coating quality required.
• Resistance to Solder Heat Test: Terminals immersed in solder bath at 2605 for 101 seconds or 40010 for 3+0/-1 seconds. Criteria include leakage current, capacitance change (within 10%), tan, and appearance.
• Change of Temperature Test: 5 cycles of temperature changes (-40C/-25C to +105C). Criteria include leakage current, tan, and appearance.
• Damp Heat Test: 5008 hours at 90~95% RH and 402. Criteria include leakage current, capacitance change (within 20%), tan (not more than 120% of specified value), and appearance.
• Vent Test: For products with vents ( 6.3mm). Operates with no dangerous conditions.
• Maximum Permissible Ripple Current: Maximum AC current at 120Hz and maximum operating temperature. Frequency multipliers provided for different frequencies and voltage/capacitance ranges.

Environment-related Substances to be Controlled
Refer to the latest document of Environment-related Substances standard (WI-HSPM-QA-072). Includes control of heavy metals, chlorinated organic compounds, brominated organic compounds, and other specific substances.

Attachment: Application Guidelines
Provides detailed guidance on circuit design, capacitor handling, mounting, cleaning, and precautions for use, storage, and disposal to ensure optimal performance and safety.