<
>
Specifications
Capacitance:
2700uF
Voltage Rating:
16V
Tolerance:
±20%
Mfr. Part #:
EGK278M1CI1HRR
Package:
Through Hole,D12.5xL18.5mm
Key Attributes
Model Number:
EGK278M1CI1HRR
Product Description
Product Overview
The SAMXON GK Series Aluminum Electrolytic Capacitors are polar, foil-type capacitors designed for use in electronic equipment. They meet IEC60384 standards and are constructed with an aluminum case, end seal rubber, and PET sleeve. These capacitors are suitable for general electronic applications, offering reliable performance across a specified temperature range.
Product Attributes
- Brand: SAMXON
- Series: GK Series
- Construction Type: Single ended, foil type
- Sleeve Material: PET
- Sealing Material: Rubber
- Lead Line Material: Tinned CP wire (Pb Free)
- Terminal Material: Aluminum wire
- Case Material: Aluminum case
- Compliance: Meets IEC60384 standards
Technical Specifications
| SAMXON Part No. | WV (Vdc) | Cap. (F) | Cap. tolerance | Temp. range() | tan (120Hz, 20) | Leakage Current (A, 2min) | Max Ripple Current at 105 100KHz (mA rms) | Impedance at 25 100kHz (max) | Load lifetime (Hrs) | Dimension (mm) DA | Sleeve D | F | d |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EGK278M1CI1HRR**P | 16 | 2700 | -20%~+20% | -40~105 | 0.18 | 432 | 2282 | 0.021 | 5000 | 12.5X18.5 | 12.5 | 5.0 | 0.6 |
General Characteristics
| Item | Characteristic |
|---|---|
| Rated voltage (WV) | 6.3, 10, 16, 25, 35 V.DC |
| Surge voltage (SV) | 8, 13, 20, 32, 44 V.DC (corresponding to WV) |
| Nominal capacitance measurement | 120Hz12Hz, 0.5Vrms, 202 |
| Leakage current measurement | 1k10 in series for 2 minutes |
| Terminal strength (Tensile) | 5 N (0.51 kgf) for 0.5mm wire; 10 N (1.0 kgf) for >0.5mm to 0.8mm wire |
| Terminal strength (Bending) | 2.5 N (0.25 kgf) for 0.5mm wire; 5 N (0.51 kgf) for >0.5mm to 0.8mm wire |
| Operating temperature range | Refer to Table 1 temperature range (-40~105 for EGK278M1CI1HRR**P) |
| Load life test | 105C 2, DC bias voltage + rated ripple current for specified hours. Meets criteria for leakage current, capacitance change (25%), tan (200% of specified), and appearance. |
| Shelf life test | 1052 for 1000+48/0 hours. Meets criteria for leakage current, capacitance change (25%), tan (200% of specified), and appearance. |
| Surge test | 1000 cycles of charge (305s) and discharge (5 min 30s) at 15~35. Meets criteria for leakage current, capacitance change (15%), tan, and appearance. |
| Vibration test | 10Hz ~ 55Hz, 1.5mm peak to peak amplitude for 2 hours in 3 directions. No intermittent contacts, open/short circuits, or mechanical damage. |
| Solderability test | 2503, 2mm dipping depth, 252.5mm/s, 30.5s. Minimum 95% surface coated. |
| Resistance to solder heat test | 2605 for 101s or 40010 for 10.1s (1.5~2.0mm from body). Meets criteria for leakage current, capacitance change (10%), tan, and appearance. |
| Change of temperature test | 5 cycles of temperature changes (-40 to +105). Meets criteria for leakage current, tan, and appearance. |
| Damp heat test | 90~95% RH at 402 for 5008 hours. Meets criteria for leakage current, capacitance change (20%), tan (120% of specified), and appearance. |
| Vent test (for 6.3 with vent) | DC test with reversed polarity. Vent operates with no dangerous conditions. |
| Maximum permissible ripple current | Refer to Table-1 for frequency and temperature multipliers. Combined DC and AC ripple voltage shall not exceed rated voltage. |
2410121611_Man-Yue-Tech-EGK278M1CI1HRR_C22462389.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
