Product Overview

The SAMXON RH Series Aluminum Electrolytic Capacitors are polar, foil-type capacitors designed for use in electronic equipment and meet IEC60384 standards. These single-ended capacitors are constructed with an aluminum case, impregnated with electrolyte, and sealed with end seal rubber and a PET vinyl sleeve. They are suitable for general electronic equipment applications.

Product Attributes

• Brand: SAMXON
• Series: RH Series
• Construction Type: Single ended, foil type
• Sleeve Material: PET
• Lead Wire Material: Tinned CP wire (Pb Free)
• Terminal Material: Aluminum wire
• Sealing Material: Rubber
• Case Material: Aluminum
• Separator Material: Electrolyte paper
• Standard Compliance: IEC60384

Technical Specifications

Note on Dimensions:

• : L<20 : =1.5; L20 : =2.0
• : D<20 : =0.5; D20 : =1.0
• d 0.05
• L+ max
• D+ max
• F0.5
• Safety vent for 6.3

Rated voltage (WV): 450 V.DC

Surge voltage (SV): 500 V.DC

Standard atmospheric conditions for measurements:

• Ambient temperature: 15C to 35C
• Relative humidity: 45% to 85%
• Air Pressure: 86kPa to 106kPa

Conditions for doubtful results:

• Ambient temperature: 20C 2C
• Relative humidity: 60% to 70%
• Air Pressure: 86kPa to 106kPa

Capacitance measurement conditions:

• Measuring Frequency: 120Hz12Hz
• Measuring Voltage: Not more than 0.5Vrms
• Measuring Temperature: 202

Leakage current measurement conditions:

• Connect with a protective resistor (1k 10) in series for 2 minutes.

Terminal strength conditions:

• Tensile force: 5 N (0.51 kgf) for 0.5mm wire; 10 N (1.0 kgf) for >0.5mm to 0.8mm wire.
• Bending force: 2.5 N (0.25 kgf) for 0.5mm wire; 5 N (0.51 kgf) for >0.5mm to 0.8mm wire.

Vent test applies to: Products with vent, diameter 6.3.

DC Current for Vent Test: 1A for diameter 22.4mm or less.