SAMXON RD Series Aluminum Electrolytic Capacitors
Product Overview
The SAMXON RD Series is a range of polar aluminum electrolytic capacitors (foil type) designed for use in electronic equipment. These capacitors meet IEC60384 standards and are constructed with a single-ended, foil-type design. They are impregnated with electrolyte and enclosed in an aluminum case, sealed with end seal rubber and finished with a vinyl sleeve. The RD series is suitable for general electronic equipment applications, offering reliable performance characteristics.
Product Attributes
- Brand: SAMXON
- Category: ALUMINUM ELECTROLYTIC CAPACITORS
- Series: RD Series
- Construction Type: Single ended, foil type
- Case Material: Aluminum case
- Sleeve Material: PVC/PET
- Sealing Material: Rubber
- Lead Material: Tinned CP wire (Pb Free)
- Separator Material: Electrolyte paper
- Compliance: Meets IEC60384 standards
Technical Specifications
| SAMXON Part No. | WV (Vdc) | Cap. (F) | Cap. tolerance | Temp. range () | tan (120Hz ,20) | Leakage Current (A,2min) | Max Ripple Current at 105 100kHz (mA rms) | Load lifetime (Hrs) | Dimension (mm) DL | F (mm) | d (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ERD225M2GE11RR**P-R | 400 | 2.2 | -20%~+20% | -40~105 | 0.20 | 43 | 68 | 8000 | 6.3x11 | 2.5 | 0.5 |
General Characteristics
| Item | Specification |
|---|---|
| Rated voltage (WV) | 160, 200, 250, 350, 400, 450 V.DC |
| Surge voltage (SV) | 200, 250, 300, 400, 450, 500 V.DC |
| Nominal capacitance measurement conditions | Frequency: 120Hz12Hz, Voltage: 0.5Vrms, Temperature: 202 |
| Leakage current measurement conditions | Series resistor (1k10) for 2 minutes |
| tan measurement conditions | Frequency: 120Hz12Hz, Voltage: 0.5Vrms, Temperature: 202 |
| Terminal strength (Tensile force) | 0.5mm wire: 10 N (1.0 kgf) |
| Terminal strength (Bending force) | 0.5mm wire: 5 N (0.51 kgf) |
| Load life test conditions | 105C 2, DC bias + ripple current for specified hours, then 16 hours recovery |
| Shelf life test conditions | 1052 for 1000+48/0 hours, then rated voltage for 30min with series resistor (1k100) |
| Surge test cycles | 1000 cycles (305s charge, 5 min 30s discharge) |
| Vibration test | 10Hz ~ 55Hz, 1.5mm peak to peak amplitude for 2 hours in 3 directions |
| Solderability test temperature | 2503 |
| Resistance to solder heat temperature | 2605 for 101 seconds OR 40010 for 3+0-1 seconds |
| Change of temperature test cycles | 5 cycles: +20 (3 min), -40 (302 min), +105 (302 min) |
| Damp heat test conditions | 90~95% RH at 402 for 5008 hours |
| Vent test (for 6.3) | DC current applied with reversed polarity (e.g., 1A for 22.4mm diameter) |
| Max Ripple Current frequency multiplier (100kHz) | 1.00 (for all capacitance ranges) |
Environment-related Substances
Refer to the latest document of Environment-related Substances standard (WI-HSPM-QA-072) for controlled substances including heavy metals, chlorinated organic compounds, brominated organic compounds, and others.
Attachment: Application Guidelines
Guidelines cover circuit design considerations (operating temperature, frequency, life expectancy, common misapplications like reverse voltage, over voltage, ripple current), series/parallel capacitor usage, mounting considerations (double-sided boards, hole positioning, clearance for vents), electrical isolation, and capacitor handling techniques (insertion, soldering, cleaning, adhesives). Precautions for environmental conditions, electrical safety, emergency procedures, long-term storage, and disposal are also detailed.
2509180925_Man-Yue-Tech-ERD225M2GE11RR_C235375.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
