<
>
Specifications
Mfr. Part #:
ERT685M2GF12TVS9RR
Package:
Through Hole,D8xL12mm
Key Attributes
Model Number:
ERT685M2GF12TVS9RR
Product Description
Product Overview
This specification applies to polar Aluminum electrolytic capacitors (foil type) designed for use in electronic equipment. These capacitors meet IEC60384 standards and are constructed with a single-ended, wound element impregnated with electrolyte, enclosed in an aluminum case and sealed with end seal rubber, finished with a vinyl sleeve. They are suitable for general electronic equipment applications.
Product Attributes
- Brand: SAMXON
- Series: RT
- Construction Type: Single ended, foil type
- Sleeve Material: PET
- Lead Line Material: Tinned CP wire (Pb Free)
- Terminal Material: Aluminum wire
- Sealing Material: Rubber
- Case Material: Aluminum case
- Separator Material: Electrolyte paper
Technical Specifications
| SAMXON Part No. | WV (Vdc) | Cap. (F) | Cap. tolerance | Temp. range() | tan (120Hz, 20) | Leakage Current (A, 2min) | Max Ripple Current at 105 100KHz (mA rms) | Load lifetime (Hrs) | Dimension (mm) DL | F | d |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ERT685M2GF12RR**RR | 400 | 6.8 | -20%~+20% | -40~105 | 0.20 | 79 | 202 | 5000 | 8X12 | 3.5 | 0.5 |
General Characteristics
| Item | Specification |
|---|---|
| Rated voltage (WV) | 160, 200, 220, 250, 350, 400, 420, 450 V.DC |
| Surge voltage (SV) | 200, 250, 270, 300, 400, 450, 470, 500 V.DC |
| Capacitance Measurement Condition | Frequency: 120Hz12Hz, Voltage: 0.5Vrms, Temperature: 202 |
| Leakage Current Condition | Connected with a protective resistor (1k 10) in series for 2 minutes |
| tan Measurement Condition | As per Capacitance measurement condition |
| Terminal Strength (Tensile Force) | 0.5mm wire: 10 N (1.0 kgf); 0.5mm wire: 5 N (0.51 kgf) |
| Terminal Strength (Bending Force) | 0.5mm wire: 5 N (0.51 kgf); 0.5mm wire: 2.5 N (0.25 kgf) |
| Load Life Test Condition | 105C 2, rated ripple current, DC bias voltage + ripple peak voltage rated voltage, for specified hours |
| Shelf Life Test Condition | 1052 for 1000+48/0 hours, then DC rated voltage applied for 30min with series resistor (1k100) |
| Surge Test Condition | 1000 cycles of 305s charge and 5 min 30s discharge with a surge voltage and resistor (100 50)/CR (k) |
| Vibration Test Condition | 10Hz ~ 55Hz, 1.5mm peak to peak amplitude, 2 hours in 3 directions |
| Solderability Test Condition | Sn-Cu solder, 2503, 2mm dipping depth, 252.5mm/s, 30.5s |
| Resistance to Solder Heat Test Condition | 2605 for 101s or 40010 for 3+0/-1s, 1.5~2.0mm from body |
| Change of Temperature Test Condition | 5 cycles of 302 min at -40/-25 and +105, with 3 min at +20 |
| Damp Heat Test Condition | 90~95% RH at 402 for 5008 hours |
| Vent Test Condition (for 6.3) | DC current applied (1A for 22.4mm dia., 10A for >22.4mm dia.) with reversed polarity |
| Maximum Permissible Ripple Current Condition | At 120Hz and maximum operating temperature; DC voltage + AC ripple voltage peak rated voltage |
2509180925_Man-Yue-Tech-ERT685M2GF12TVS9RR_C5444824.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
