<
>
Specifications
Capacitance:
100nF
Operating Temperature:
-40℃~+100℃
Tolerance:
±5%
Voltage Rating:
2kV
Mfr. Part #:
MMKP104J3F2701
Package:
Through Hole,P=27.5mm
Key Attributes
Model Number:
MMKP104J3F2701
Product Description
Product Overview
The KYET MMKP82 is a double-sided metallized polypropylene film capacitor in a box type. It is designed for applications requiring stable capacitance and high reliability. The capacitor features a metallized polypropylene film dielectric, special solder for the metal spray, tin-plated copper leads, and an epoxy resin encapsulation with UL V-0 flame retardant rating. The plastic case also boasts a UL V-0 flame retardant rating. This capacitor is suitable for use within a rated voltage and operating temperature range, and precautions for circuit design, mounting, storing, and handling should be observed to ensure optimal performance and prevent damage.
Product Attributes
- Brand: KYET ()
- Origin: Dongguan, China
- Material: Metallized Polypropylene Film
- Certifications: UL V-0 (Epoxy Resin and Plastic Case)
Technical Specifications
| KYET P/N | Customer P/N | Description | Capacitance (nF) | Tolerance (%) | Rated Voltage (VDC) | Lead Space (mm) | Dimensions (W x H x T) (mm) | Lead Diameter (d) (mm) | Lead Length (min) (mm) |
| MMKP104J3F2701 | 104 | Double-sided metallized polypropylene film capacitor (Box type) | 100 | 5 | 2000 | 27.5 | 32 x 28 x 14 | 0.8 | 15 |
| Item | Description | Conditions | |
| Scope | This specification applies to KYET MMKP82 series double-sided metallized polypropylene film capacitors. | ||
| Standard Atmospheric Conditions for Measurements | Ambient Temperature | 15 to 35 (if any doubt, +20 5) | |
| Relative Humidity (R.H.) | 45% to 75% (if any doubt, 60% to 70%) | ||
| Air Pressure | 86 kPa to 106 kPa | ||
| Operating Temperature Range | Capacitor can be operated continuously at rated voltage. | -40 to +105 | |
| Construction | Dielectric | Double-sided metallized polypropylene film | |
| Metal Spray | Special Solder | ||
| Lead Wire | Tin-plated copper wire | ||
| Epoxy Resin | UL V-0 flame retardant rating | ||
| Plastic Case | UL V-0 flame retardant rating | ||
| Marking | Manufacturer's Symbol | KYET ELECTRONICS CO., LTD | |
| Type or Material | MMKP82 (Metallized Polypropylene Film) | ||
| Capacitor Class | KP (MMKP class) | ||
| Nominal Capacitance | Expressed in 3-digit (EIA) code. | ||
| Tolerance | J (5%), K (10%), M (20%) | ||
| Rated Voltage | 400, 630, 1000, 1600, 2000 VDC | ||
| Operating Temperature Range | -40105 | ||
| Dissipation Factor (tan ) | Max 0.1% (at 1KHz, 25) | ||
| Insulation Resistance (IR) | CR0.33F: IR10000M; CR0.33F: IR5000M/F (UR100V) | ||
| Electrical Characteristics | Withstand Voltage (Terminal to Terminal) | Apply 1.5*Ur (DC) for 60 sec. (no abnormality) | |
| Withstand Voltage (Terminal to Enclosure) | Apply 2*Ur+500V for 2 to 5 sec. Min. 2000VDC (no abnormality) | ||
| Dielectric Loss (DF) | 0.001 (0.1%) at 1 KHz (Measuring Frequency: 2%, Measuring Voltage: 1 Vrms) | ||
| Capacitance (CAP) | Within the tolerance specified (at +20 5) (Measuring Frequency: 2%, Measuring Voltage: 1 Vrms) | ||
| Insulation Resistance (I.R.) | 10,000 Mohm (C0.33uf); 5,000 Mohm*uF/C (C>0.33uf) (Test Voltage: 100 VDC, Charge Time: 605 sec.) | ||
| Soldering Property | More than 90% of circumferential surface of lead wire covered with new solder. (Soldering temperature: +260 5, Immersion duration: 2 0.5 sec.) | ||
| Mechanical Characteristics | Terminal Strength (Tensile Strength) | Apply 1.0Kg for 10 1 sec. to the terminal in the axial direction (no abnormality) | |
| Endurance Characteristics | Temperature Cycle | 5 cycles (Conditions: 1. +202 for 3 min, 2. -403 for 10 min, 3. +202 for 3 min, 4. +1002 for 10 min, 5. +202 for 3 min. After test, allow 1.50.5 Hrs at ordinary condition.) | Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: Max 0.002 (0.2%) @ 1KHz. Insulation Resistance: 50% of the limit value of NO.5.4. |
| Dry Heat Resistance | Test Temperature: +100 2. Test Duration: 16 1 hrs. | Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: Max 0.002 (0.2%) @ 1KHz. Insulation Resistance: 50% of the limit value of NO.5.4. | |
| Cold Resistance | Test Temperature: -40 3. Test Duration: 2 1 hrs. | Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: Max 0.002 (0.2%) @ 1KHz. Insulation Resistance: 50% of the limit value of NO.5.4. | |
| Damp Heat | Test Temperature: +40 2. Test Humidity: 90% to 95% R.H. Test Duration: 2 1 hrs. After test, allow 1.50.5 Hrs at ordinary condition. | Appearance: Shall be no remarkable change. |
2504101957_KYET-MMKP104J3F2701_C557509.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
