<
>
Specifications
Lifetime:
5000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
180uF
Height - Seated (Max):
30mm
Pin Spacing:
10mm
Voltage Rating:
450V
Diameter:
25mm
Mfr. Part #:
EEP187M2WO30SZ4HP
Package:
Through Hole,D25xL30mm
Key Attributes
Model Number:
EEP187M2WO30SZ4HP
Product Description
Product Overview
The SAMXON EP Series Aluminum Electrolytic Capacitors are polar, foil-type capacitors designed for use in electronic equipment. Meeting IEC60384 standards, these capacitors are constructed with an aluminum case, PET sleeve, and solder-coated copper clad steel terminals. They are impregnated with electrolyte and sealed with end seal rubber. The EP series offers reliable performance across a wide temperature range and is suitable for various electronic applications.
Product Attributes
- Brand: SAMXON
- Series: EP Series
- Construction Type: Single ended
- Sleeve Material: PET
- Terminal Material: Solder coated copper clad steel
- Seal Material: Rubber-laminated bakelite
- Conforms to: IEC60384
Technical Specifications
| SAMXON Part No. | WV (Vdc) | Cap. (F) | Cap. tolerance | Temp. range() | tan (120Hz, 20) | Leakage Current (A, 5min) | Max Ripple Current at 105 120Hz (A rms) | Load lifetime (Hrs) | Dimension (mm) DL | F (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| EEP187M2WO30SZ4*P | 450 | 180 | -20%~+20% | -40~105 | 0.25 | 854 | 0.91 | 5000 | 25x30 | 101.0 |
General Characteristics
| Item | Specification |
|---|---|
| Rated voltage (WV) | 10, 16, 25, 35, 50, 63, 80, 100, 160, 180, 200, 220, 250, 315, 350, 400, 420, 450, 500 V.DC |
| Surge voltage (SV) | 13, 20, 32, 44, 63, 79, 100, 125, 200, 225, 250, 270, 300, 365, 400, 450, 470, 500, 550 V.DC |
| Capacitance Measurement | Frequency: 120Hz12Hz, Voltage: 0.5Vrms, Temperature: 202 |
| Leakage Current Test | Connected with 1k10 resistor in series for 5 minutes. |
| tan Measurement | Frequency: 120Hz12Hz, Voltage: 0.5Vrms, Temperature: 202 |
| Terminal Strength Test | Static load of 25N (2.5kgf) applied axially for 30s. |
| Load Life Test | 1052, DC bias voltage + rated ripple current for specified hours. |
| Shelf Life Test | Stored at 1052 for 1000+48/0 hours, then tested after stabilization. |
| Surge Test | 1000 cycles of charge (305s) and discharge (5 min 30s) with surge voltage. |
| Vibration Test | 10Hz ~ 55Hz, 1.5mm peak to peak amplitude for 2 hours in 3 directions. |
| Solderability Test | Sn-Cu solder, 2503, 2mm dipping depth, 252.5mm/s, 30.5s. |
| Resistance to Solder Heat Test | 2605 for 101s or 40010 for 3+0/-1s, 1.5~2.0mm from body. |
| Change of Temperature Test | 5 cycles of temperature cycling (20, rated low temp, +105). |
| Damp Heat Test | 90~95% RH at 402 for 5008 hours. |
| Vent Test (for products with vent) | Reverse polarity DC test with specified current based on diameter. |
| Maximum Permissible Ripple Current | Maximum AC current at 120Hz and maximum operating temperature. Frequency multipliers provided. |
2509180925_Man-Yue-Tech-EEP187M2WO30SZ4HP_C3028818.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
