<
>
Specifications
Operating Temperature:
-40℃~+105℃
Capacitance:
33uF
Height - Seated (Max):
25mm
Voltage Rating:
400V
Diameter:
10mm
Tolerance:
±20%
Mfr. Part #:
ERT336M2GG25RR
Package:
Through Hole,D10xL25mm
Key Attributes
Model Number:
ERT336M2GG25RR
Product Description
Product Overview
The SAMXON RT Series is a line of polar aluminum electrolytic capacitors (foil type) designed for use in electronic equipment. These capacitors meet IEC60384 standards and are constructed with an aluminum case, end seal rubber, and a vinyl sleeve. They are suitable for general electronic equipment applications and are built for reliability and performance.
Product Attributes
- Brand: SAMXON
- Series: RT Series
- Construction Type: Single ended
- Sleeve Material: PET
- Sealing Material: Rubber
- Lead Line Material: Tinned CP wire (Pb Free)
- Terminal Material: Aluminum wire
- Anode Foil: Formed aluminum foil
- Cathode Foil: Etched aluminum foil or formed aluminum foil
- Separator Material: Electrolyte paper
- Case Material: Aluminum case
Technical Specifications
| SAMXON Part No. | WV (Vdc) | Cap. (F) | Cap. tolerance | Temp. range() | tan (120Hz, 20) | Leakage Current (A, 2min) | Max Ripple Current at 105 100KHz (mA rms) | Load lifetime (Hrs) | Dimension (mm) DL | d | F |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ERT336M2GG25RR**R1R | 400 | 33 | -20%~+20% | -40~105 | 0.20 | 289 | 761 | 5000 | 10X25 | 5.0 | 0.6 |
Additional Technical Data:
| Item | Description |
|---|---|
| Rated voltage (WV) | WV (V.DC): 160, 200, 220, 250, 350, 400, 420, 450 |
| Surge voltage (SV) | SV (V.DC): 200, 250, 270, 300, 400, 450, 470, 500 |
| Nominal capacitance measurement | Frequency: 120Hz12Hz, Voltage: 0.5Vrms, Temperature: 202 |
| Leakage current condition | Connected with 1k10 resistor for 2 minutes. |
| Terminal strength (Tensile) | 0.5mm and less: 5 N (0.51 kgf); Over 0.5mm to 0.8mm: 10 N (1.0 kgf) |
| Terminal strength (Bending) | 0.5mm and less: 2.5 N (0.25 kgf); Over 0.5mm to 0.8mm: 5 N (0.51 kgf) |
| Load life test conditions | 105C 2, DC bias voltage + rated ripple current for specified hours. |
| Shelf life test conditions | 1052 for 1000+48/0 hours, followed by DC rated voltage applied for 30min. |
| Surge test cycles | 1000 cycles (charge 305s, discharge 5 min 30s). |
| Vibration test frequency | 10Hz ~ 55Hz, Peak to peak amplitude: 1.5mm. |
| Solderability test temperature | 2503 (Sn-Cu solder). |
| Resistance to solder heat temperature | 2605 for 101 seconds or 40010 for 3+0/-1 seconds. |
| Change of temperature test cycles | 5 cycles (20, Rated low temp, Rated high temp). |
| Damp heat test conditions | 90~95% RH at 402 for 5008 hours. |
| Vent test DC current | Diameter 22.4mm or less: 1A; Over 22.4mm: 10A. |
| Maximum permissible ripple current frequency multipliers | 120Hz: 1.00, 1kHz: 0.80, 10kHz: 0.40, 100kHz: 0.20 (example for 1~5.6F range) |
2410121552_Man-Yue-Tech-ERT336M2GG25RR_C22462404.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
