<
>
Specifications
Operating Temperature:
-45℃~+105℃
Lifetime:
10000hrs@105℃
Capacitance:
10uF
Height - Seated (Max):
12.5mm
Pin Spacing:
5mm
Voltage Rating:
400V
Diameter:
10mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
ERH106M2GG1BCB
Package:
Through Hole,D10xL12.5mm
Key Attributes
Model Number:
ERH106M2GG1BCB
Product Description
Product Overview
The SAMXON RH Series Aluminum Electrolytic Capacitors are polar, foil-type capacitors designed for use in electronic equipment. These capacitors meet IEC60384 standards and are constructed with a single-ended, wound element impregnated with electrolyte, enclosed in an aluminum case and sealed with end seal rubber, finished with a PET vinyl sleeve. They are suitable for applications requiring reliable performance across a specified temperature range and voltage ratings.
Product Attributes
- Brand: SAMXON
- Series: RH Series
- Construction Type: Single ended
- Sleeve Material: PET
- Lead Line Material: Tinned CP wire (Pb Free)
- Terminal Material: Aluminum wire
- Sealing Material: Rubber
- Al-Foil (+) Material: Formed aluminum foil
- Al-Foil (-) Material: Etched aluminum foil or formed aluminum foil
- Case Material: Aluminum case
- Separator Material: Electrolyte paper
Technical Specifications
| SAMXON Part No. | WV (Vdc) | Cap. (F) | Cap. tolerance | Temp. range() | tan (120Hz, 20) | Leakage Current (A, 2min) | Max Ripple Current at 105 100KHz (mA rms) | Load lifetime (Hrs) | Dimension (mm) DL | F | d | Sleeve |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ERH106M2GG1BCB**P1 | 400 | 10 | -20%~+20% | -40~105 | 0.20 | 105 | 228 | 10000 | 10X12.5 | 5.0 | 0.6 | PET |
Rated Voltage & Surge Voltage (Table 2)
| WV (V.DC) | SV (V.DC) |
|---|---|
| 160 | 200 |
| 200 | 250 |
| 220 | 270 |
| 250 | 300 |
| 350 | 400 |
| 400 | 450 |
| 420 | 470 |
| 450 | 500 |
Terminal Strength (Table 1 - Lead wire diameter vs. force)
| Diameter of lead wire | Tensile force N (kgf) | Bending force N (kgf) |
|---|---|---|
| 0.5mm and less | 5 (0.51) | 2.5 (0.25) |
| Over 0.5mm to 0.8mm | 10 (1.0) | 5 (0.51) |
Temperature Characteristic Impedance Ratio at -25 (Table 1)
| Working Voltage (V) | Z-25/Z+20 |
|---|---|
| 160 | 3 |
| 200 | 3 |
| 250 | 3 |
| 350 | 5 |
| 400 | 5 |
| 450 | 6 |
Vibration Test Mounting Requirement
| Condition | Requirement |
|---|---|
| Capacitor with diameter greater than 12.5mm or longer than 25mm | Must be fixed in place with a bracket. |
Vent Test Diameter vs. DC Current (Table 3)
| Diameter (mm) | DC Current (A) |
|---|---|
| 22.4 or less | 1 |
Frequency Multipliers for Ripple Current
| Freq. (Hz) | Cap. (F) | Coefficient (120Hz) | Coefficient (1k) | Coefficient (10k) | Coefficient (100k) |
|---|---|---|---|---|---|
| 120 | 1~5.6 | 0.20 | 0.40 | 0.80 | 1.00 |
| 6.8~180 | 0.40 | 0.75 | 0.90 | 1.00 | |
| 220~ | 0.50 | 0.85 | 0.94 | 1.00 |
Clearance for Case Mounted Pressure Relief Vents
| Capacitor Diameter | Minimum Clearance |
|---|---|
| 6.3~16mm | 2mm |
| 18~35mm | 3mm |
| 40mm or greater | 5mm |
2410121858_Man-Yue-Tech-ERH106M2GG1BCB_C238465.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
