<
>
Specifications
Mfr. Part #:
EKM336M2GG18TC71AGX
Package:
Through Hole,D10xL18mm
Key Attributes
Model Number:
EKM336M2GG18TC71AGX
Product Description
Product Overview
The SAMXON KM Series Aluminum Electrolytic Capacitors are polar, foil-type capacitors designed for use in electronic equipment. They meet IEC60384 standards and are constructed with a single-ended design, featuring an aluminum case, a vinyl sleeve, and impregnated electrolyte. These capacitors are suitable for general electronic applications requiring reliable performance.
Product Attributes
- Brand: SAMXON
- Series: KM Series
- Construction Type: Single ended, foil type
- Sleeve Material: PET
- Standards Compliance: IEC60384
Technical Specifications
| SAMXON Part No. | WV (Vdc) | Cap. (F) | Cap. tolerance | Temp. range() | tan (120Hz, 20) | Leakage Current (A, 2min) | Max Ripple Current at 105 120Hz (mA rms) | ESR at 25 100kHz () | Load lifetime (Hrs) | Dimension (mm) DL | F | d | Sleeve |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EKM336M2GG18TC71AGX | 400 | 33 | -20%~+20% | -25~105 | 0.20 | 436 | 147 | 3 | 2000 | 10X18 | 5.0 | 0.6 | PET |
General Characteristics
| Item | Performance |
|---|---|
| Rated voltage (WV) | 6.3, 10, 16, 25, 35, 50, 63, 100, 160, 200, 220, 250, 350, 400, 420, 450 V.DC |
| Surge voltage (SV) | 8, 13, 20, 32, 44, 63, 79, 125, 200, 250, 270, 300, 400, 450, 470, 500 V.DC |
| Nominal capacitance (Tolerance) | Measured at 120Hz12Hz, 0.5Vrms, 202. Shall be within specified tolerance. |
| Leakage current | Measured after 2 minutes with a 1k10 resistor in series. Refer to Table 1. |
| tan | Measured at 120Hz12Hz, 0.5Vrms, 202. Refer to Table 1. |
| Terminal strength | Tensile force: 5N (0.51kgf) for 0.5mm wire, 10N (1.0kgf) for >0.5mm to 0.8mm wire. Bending force: 2.5N (0.25kgf) for 0.5mm wire, 5N (0.51kgf) for >0.5mm to 0.8mm wire. No breakage or looseness. |
| Load life test | 105C 2, DC bias + ripple current for Table 1 hours. Criteria: Leakage current as per 4.3, Capacitance change 20%, tan 200% of specified, no electrolyte leakage. |
| Shelf life test | 1052 for 1000+48/0 hours. Criteria: Leakage current as per 4.3, Capacitance change 20%, tan 200% of specified, no electrolyte leakage. |
| Surge test | 1000 cycles of 30s charge and 5min 30s discharge at 15~35. Criteria: Leakage current as specified, Capacitance change 15%, tan as specified, no electrolyte leakage. |
| Vibration test | 10Hz ~ 55Hz, 1.5mm peak to peak amplitude for 2 hours in 3 directions. Criteria: No intermittent contacts, open/short circuit, damage, or electrolyte leakage. Markings legible. |
| Solderability test | 2503, 2mm depth, 252.5mm/s, 30.5s. Criteria: Min 95% surface coated. |
| Resistance to solder heat test | 2605 for 101s or 40010 for 3+0/-1s to 1.5~2.0mm from body. Criteria: Leakage current as specified, Capacitance change 10%, tan as specified, no electrolyte leakage. |
| Change of temperature test | 5 cycles of 20, rated low temp (-40/-25) 302 min, rated high temp (+105) 302 min. Criteria: Leakage current as specified, tan as specified, no electrolyte leakage. |
| Damp heat test | 90~95% RH at 402 for 5008 hours. Criteria: Leakage current as specified, Capacitance change 20%, tan 120% of specified, no electrolyte leakage. |
| Vent test | Applies to products with vent (diameter 6.3mm). DC test with reversed polarity. Criteria: Vent operates with no dangerous conditions. |
| Maximum permissible ripple current | Maximum AC current at 120Hz and maximum operating temperature. Refer to Table 1 and frequency multipliers. |
2511031850_Man-Yue-Tech-EKM336M2GG18TC71AGX_C50346621.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
