<
>
Specifications
Operating Temperature:
-45℃~+105℃
Lifetime:
4000hrs@105℃
Capacitance:
220uF
Height - Seated (Max):
25mm
Pin Spacing:
5mm
Voltage Rating:
100V
Diameter:
12.5mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
922mA@100kHz
Mfr. Part #:
EGF227M2AI25RR
Package:
Through Hole,D12.5xL25mm
Key Attributes
Model Number:
EGF227M2AI25RR
Product Description
Product Overview
The SAMXON GF Series Aluminum Electrolytic Capacitors are polar, foil-type capacitors designed for use in electronic equipment. Meeting IEC60384 standards, these capacitors are constructed with a single-ended type, featuring terminals fixed to anode and cathode foil, wound together with paper, impregnated with electrolyte, and enclosed in an aluminum case. They are sealed with end seal rubber and finished with a vinyl sleeve. These capacitors are suitable for general electronic equipment applications.
Product Attributes
- Brand: SAMXON
- Series: GF Series
- Construction Type: Single Ended
- Sleeve Material: PET
- Sealing Material: Rubber
- Lead Line Material: Tinned CP wire (Pb Free)
- Terminal Material: Aluminum wire
Technical Specifications
| SAMXON Part No. | WV (Vdc) | Cap. (F) | Cap tolerance | Temp. range() | tan (120Hz, 20) | Leakage Current (A, 2min) | Max Ripple Current at 105 100kHz (mA rms) | Impedance at 20 100kHz (max) | Load lifetime (Hrs) | Dimension (mm) DL | F | d |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EGF227M2AI25RR**P | 100 | 220 | -20%~+20% | -40~105 | 0.08 | 220 | 922 | 0.096 | 4000 | 12.5X25 | 5.0 | 0.6 |
Other Specifications
| Item | Specification |
|---|---|
| Rated voltage (WV) | 6.3, 10, 16, 25, 35, 50, 63, 100 V.DC |
| Surge voltage (SV) | 8, 13, 20, 32, 44, 63, 79, 125 V.DC |
| Nominal Capacitance Measurement Conditions | Frequency: 120Hz12Hz, Voltage: 0.5Vrms, Temperature: 202 |
| Terminal Strength (Tensile) | 0.5mm and less: 5 N (0.51 kgf), Over 0.5mm to 0.8mm: 10 N (1.0 kgf) |
| Terminal Strength (Bending) | 0.5mm and less: 2.5 N (0.25 kgf), Over 0.5mm to 0.8mm: 5 N (0.51 kgf) |
| Load Life Test Conditions | 105C 2, DC bias voltage + rated ripple current for Table 1, 16 hours recovering time |
| Shelf Life Test Conditions | 1052, no voltage applied for 1000+48/0 hours, followed by 4-8 hours stabilization at room temperature, then DC rated voltage applied for 30min through a 1k100 resistor. |
| Surge Test Cycles | 1000 cycles (305s charge, 5 min 30s discharge) |
| Vibration Test Conditions | 10Hz ~ 55Hz, 1.5mm peak to peak amplitude, 2 hours in each of 3 mutually perpendicular directions |
| Solderability Test Conditions | Soldering temperature: 2453C, Dipping depth: 2mm, Dipping speed: 252.5mm/s, Dipping time: 30.5s |
| Resistance to Solder Heat Conditions | 2605 for 10 1 seconds OR 40010 for 1+0/-1 seconds, 1.5~2.0mm from the body |
| Change of Temperature Test Cycles | 5 cycles: (1)+20 3 min, (2)-40 (-25) 302 min, (3)+105 302 min |
| Damp Heat Test Conditions | 90~95% RH at 402 for 5008 hours |
| Vent Test (for 6.3 with vent) | DC Current: 1A (for 22.4mm diameter), 10A (for >22.4mm diameter) |
| Maximum Permissible Ripple Current Frequency Multipliers | 120~180Hz: 0.40-1.00, 1k Hz: 0.75-1.00, 10k Hz: 0.90-0.95, 100k Hz: 1.00 |
2509180925_Man-Yue-Tech-EGF227M2AI25RR_C217582.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
