X-CON BRAND CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS

This specification applies to conductive polymer aluminum solid capacitors used in electronic equipment. These capacitors are designed for reliable performance in various electronic applications.

Product Attributes

Brand: X-CON
Type: Conductive Polymer Aluminum Solid Capacitors
Series: ULR
Model: ULR 16V1000F (10x12.5)
Construction: Single-ended type with tinned copper or CP lead lines, aluminum terminals, rubber sealing, aluminum foil, and aluminum case.
Electrolyte Paper: Manila Hemp
Issued Date: 2016-04-12
Version: 01

Technical Specifications

Item	Condition	Specification
Rated Voltage (WV)	-	16 V.DC
Surge Voltage (SV)	-	18.4 V.DC
Nominal Capacitance (Tolerance)	Measuring Frequency: 120Hz12Hz; Measuring Voltage: 0.5Vrms; Measuring Temperature: 202	Within specified capacitance tolerance.
Leakage Current	After DC Voltage applied (1k10 series resistor) to reach rated voltage, measured after 2 minutes. If exceeding Table 3 values, remeasure after rated voltage for 120min at 105.	See Table 3
Tangent of Loss Angle (tan)	Measuring Frequency, Voltage, and Temperature as per 4.2. Working voltage: 16V.	0.10 (max.)
ESR	Measuring frequency: 100kHz to 300kHz; Measuring temperature: 202; Measuring point: 2mm from sealing resin surface.	Less than initial limit (See Table 3) at 20.
Temperature Characteristic	Impedance ratio (Z-55/Z20, Z105/Z20) at 100kHz; Capacitance change (C/C 20) at 120Hz; tan at 120Hz.	Z-55/Z20 1.25; Z105/Z20 1.25; C/C 20 within 5% of step 1; tan value of item 4.4.
Load Life Test	1052, rated voltage, 2000+48/0 hours.	Capacitance Change: Within 20% of initial; tan: 1.5 times of item 4.4; ESR: 1.5 times of item 4.5; Leakage current: value of item 4.3; Appearance: No notable changes.
Surge Test	Applied surge voltage with (10050)/CR (k) resistor. 1000 cycles (305s charge, 5 min 30s discharge). Temperature: 15~35. CR: Nominal Capacitance (F).	Capacitance Change: Within 20% of initial; tan: 1.5 times of item 4.4; ESR: 1.5 times of item 4.5; Leakage current: value of item 4.3.
Damp Heat Test	90~95%RH at 602 for 100048 hours.	Capacitance Change: Within 20% of initial; tan: 1.5 times of item 4.4; ESR: 1.5 times of item 4.5; Leakage current: value of item 4.3; Appearance: No notable changes.
Maximum Permissible Ripple Current	Maximum A.C current at 100kHz and maximum operating temperature. (See Table 3). Combined DC and peak AC voltage shall not exceed rated voltage.	Refer to Table 3 for specific values based on frequency.
Rapid Change of Temperature	Applied voltage: without load. 5 cycles.	Capacitance change: Within 10% of initial; tan: value of item 4.4; Leakage current: value of item 4.3 (after voltage treatment).
Lead Strength (Pull)	Static load force applied axially away from body for 101 s. Lead wire diameter (mm): 0.5 d 0.8.	Load force: 10 N.
Lead Strength (Bending)	Capacitor vertical, specified weight applied to one lead, rotated 900 to horizontal and back. Lead wire diameter (mm): 0.5 d 0.8.	Load force: 5 N.
Lead Strength Performance	After a) or b) test.	Leakage current: value of item 4.3; Outward Appearance: No cutting and slack of lead terminals.
Resistance to Vibration	Frequency: 10 to 55 Hz (1 min interval / 10 55 10Hz). Amplitude: 0.75mm (Total excursion 1.5mm). Direction: X, Y, Z (3 axes). Duration: 2 hours.	(Criteria not fully specified in provided text for this item)

2411220247_Man-Yue-Tech-ULR108M1CG1BRR_C840197.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

Email*

Phone / WhatsApp

Name

Company Name

Inquiry Message*

Attach Files

Choose Files

You Can Upload Up To 5 Files And Each File Sized 10M Max