X-CON BRAND CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
This specification applies to conductive polymer aluminum solid capacitors used in electronic equipment. These capacitors are designed for reliable performance in various electronic applications.
Product Attributes
- Brand: X-CON
- Category: CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
- Model: ULR 16V2200F (10x20)
- Version: 01
- Issued Date: 2020-10-26
Technical Specifications
| Rated Voltage (WV) | Surge Voltage (SV) | Nominal Capacitance (Tolerance) | Leakage Current | Tangent of Loss Angle (tan) | ESR (20) | Operating Temperature Range | Load Life Test | Damp Heat Test | Max Permissible Ripple Current (100kHz) | Lead Strength (Pull) | Lead Strength (Bend) | Resistance to Vibration |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 16 V.DC | 18.4 V.DC | 2200F (20%) @ 120Hz, 0.5Vrms, 202 | See Table 3 (after 2 min @ rated voltage) | 0.10 max @ 16V | < Initial Limit (See Table 3) @ 100kHz-300kHz | -55 to 105 | 2000+48/0 hours @ 1052 with rated voltage (Cap. Change: 20%, tan: 1.5x initial, ESR: 1.5x initial, Leakage Current: initial) | 100048 hours @ 602, 90~95%RH (Cap. Change: 20%, tan: 1.5x initial, ESR: 1.5x initial, Leakage Current: initial) | See Table 3 | 10 N (for 0.5 d 0.8 mm) | 5 N (for 0.5 d 0.8 mm) | Capacitance difference within 5% of initial value after test. |
Construction
Single ended type with terminals fixed to anode and cathode foil, wound together with paper. The wound element is formed, carbonized, impregnated with polymer and polymerized, then enclosed in an aluminum case and sealed tightly with end seal rubber.
Materials
- Lead Line: Tinned Copper Line or CP Line (Pb Free)
- Terminal: Aluminum
- Sealing Material: Rubber
- Al-Foil (+): Aluminum
- Al-Foil (-): Aluminum
- Case: Aluminum
- Electrolyte paper: Manila Hemp
Standard Conditions for Measurement
- Ambient temperature: 15 to 35
- Relative humidity: 45% to 75%
- Air Pressure: 86kPa to 106kPa
- For doubtful results: Ambient temperature: 20 2, Relative humidity: 60% to 70%, Air Pressure: 86kPa to 106kPa
Product Marking
Refer to page 12 of the specification.
Product Dimensions, Impedance & Maximum Permissible Ripple Current
Refer to page 13 of the specification.
Forming Dimension
Refer to page 14 of the specification.
Application Guideline
Includes circuit design, voltage, sudden charge and discharge restrictions, ripple current, leakage current, failure rate, capacitor insulation, and precautions for using capacitors. Refer to pages 15-16.
Long Term Storage
Refer to page 16 of the specification.
Mounting Precautions
Refer to page 16 of the specification.
List of Environment-related Substances to be Controlled (Controlled Substances)
Refer to page 17 of the specification.
2410121457_Man-Yue-Tech-ULR228M1CG20RR_C840212.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
