<
>
Specifications
Voltage Rating:
6.3V
Capacitance:
1000uF
Lifetime:
2000hrs@105℃
Tolerance:
±20%
Pin Spacing:
3.5mm
Equivalent Series Resistance(ESR):
7mΩ@100kHz
Height - Seated (Max):
11.5mm
Operating Temperature:
-55℃~+105℃
Ripple Current:
6.1A@100kHz
Diameter:
8mm
Mfr. Part #:
ULR108M0JF1ARR
Package:
Through Hole,D8xL11.5mm
Key Attributes
Model Number:
ULR108M0JF1ARR
Product Description
X-CON BRAND CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
This specification applies to conductive polymer aluminum solid capacitors used in electronic equipment.
Product Attributes
- Brand: X-CON
- Supplier: SAMXON ELECTRONIC COMPONENTS LIMITED
- Series: ULR
- Construction: Single ended type, aluminum case, sealed with end seal rubber.
- Materials: Tinned Copper Line or CP Line (Pb Free) for Lead Line; Aluminum for Terminal, Al-Foil (+), Al-Foil (-), and Case; Rubber for Sealing Material; Manila Hemp for Electrolyte paper.
- Date of Issue: 2015-12-03
Technical Specifications
| Category | Description | Value |
| Part Number System | ULR 108 M 0J F 1A RR | |
| Capacitance Code | 108 | 1000F |
| Rated Voltage Code | 0J | 6.3V (WV.DC) |
| Type Code | RR | Bulk |
| Capacitance Tolerance | M | -20% ~ +20% |
| Diameter Code | F | 8mm |
| Case Length Code | 1A | 11.5mm |
| Operating Temperature Range | -55C to 105C | |
| Rated Voltage (WV) | WV (V.DC) | 6.3 |
| Surge Voltage (SV) | SV (V.DC) | 7.2 |
| Nominal Capacitance (Tolerance) | Measuring Frequency: 120Hz12Hz Measuring Voltage: 0.5Vrms Measuring Temperature: 202 | Within specified capacitance tolerance |
| Leakage Current | After DC voltage applied through 1k protective resistor for 2 minutes at rated voltage. | See Table 3 (Refer to original document for Table 3) |
| Tangent of loss angle (tan) | Measuring Frequency: 120Hz Working voltage: 6.3V | 0.10 (max.) |
| ESR | Measuring frequency: 100kHz to 300kHz Measuring temperature: 202 | Less than initial limit (See Table 3) |
| Temperature Characteristic | Impedance ratio (Z-55 / Z 20) 1.25 Impedance ratio (Z105 / Z 20) 1.25 Capacitance change (C/C 20) Within 5% of initial tan value of item 4.4 | At -55, 105 relative to 20 |
| Load Life Test | 105 2 C, rated voltage, 2000 +48/0 hours | Capacitance Change: Within 20% of initial tan: 1.5 times of initial ESR: 1.5 times of initial Leakage current: initial value Appearance: No notable changes |
| Surge Test | Applied surge voltage through 1k resistor for 305 sec, repeated 1000 times. | Capacitance Change: Within 20% of initial tan: 1.5 times of initial ESR: 1.5 times of initial Leakage current: initial value |
| Damp Heat Test | 90~95%RH at 602 for 100048 hours | Capacitance Change: Within 20% of initial tan: 1.5 times of initial ESR: 1.5 times of initial Leakage current: initial value Appearance: No notable changes |
| Maximum Permissible Ripple Current | At 100kHz and maximum operating temperature. | See Table 3 (Refer to original document for Table 3) |
| Rapid Change of Temperature | 5 cycles (-55 to 105) | Capacitance change: Within 10% of initial tan: value of item 4.4 Leakage current: value of item 4.3 (after voltage treatment) |
| Lead Strength | Lead pull strength (0.5d0.8mm): 10N for 10s Lead bending: 5N load | Leakage current: value of item 4.3 Appearance: No cutting and slack of lead terminals |
2409291234_Man-Yue-Tech-ULR108M0JF1ARR_C840135.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
