<
>
Specifications
Voltage Rating:
6.3V
Capacitance:
330uF
Lifetime:
2000hrs@105℃
Tolerance:
±20%
Pin Spacing:
2.5mm
Equivalent Series Resistance(ESR):
11mΩ@100kHz
Height - Seated (Max):
6mm
Operating Temperature:
-55℃~+105℃
Ripple Current:
3.16A@100kHz
Diameter:
6.3mm
Mfr. Part #:
ULR337M0JE06RR
Package:
Through Hole,D6.3xL6mm
Key Attributes
Model Number:
ULR337M0JE06RR
Product Description
X-CON BRAND CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
This specification applies to X-CON brand conductive polymer aluminum solid capacitors designed for use in electronic equipment. These capacitors offer advanced performance characteristics suitable for various applications.
Product Attributes
- Brand: X-CON
- Type: Conductive Polymer Aluminum Solid Capacitors
- Series: ULR
- Construction: Single-ended type with tinned copper or CP (Pb Free) lead lines, aluminum terminals, rubber sealing, aluminum foil for anode and cathode, aluminum case, and electrolyte paper (Manila Hemp).
Technical Specifications
| Part Number Component | Description | Value/Specification |
|---|---|---|
| Series | ULR | ULR |
| Capacitance Code | Represents Capacitance (F) | 337 = 330F |
| Rated Voltage Code | Represents Rated Voltage (W.V.) | 0J = 6.3V |
| Type Code | Type | RR = Bulk |
| Capacitance Tolerance | Tolerance | M = -20% ~ +20% |
| Diameter Code | Diameter | E = 6.3mm |
| Case Length Code | Case Length | 06 = 6mm |
| Rated Voltage (WV) | Working Voltage (V.DC) | 6.3V |
| Surge Voltage (SV) | Surge Voltage (V.DC) | 7.2V |
| Nominal Capacitance | Condition: 120Hz12Hz, 0.5Vrms, 202 | Shall be within specified tolerance (-20% ~ +20%) |
| Leakage Current | Condition: After 2 mins at rated voltage (1k protective resistor), 20 | See Table 3 (not provided in source) |
| Tangent of Loss Angle (tan) | Condition: 120Hz, 202 | 6.3V WV: 0.10 (max.) |
| ESR | Condition: 100kHz-300kHz, 202 | Less than initial limit (See Table 3 - not provided) |
| Temperature Characteristic | Impedance ratio at 100kHz (Z-55 / Z20, Z105 / Z20), Capacitance change (C/C 20), tan at 120Hz | Z-55 / Z20 1.25; Z105 / Z20 1.25; C/C 20 Within 5%; tan value of item 4.4 |
| Load Life Test | Condition: 1052, rated voltage, 2000+48/0 hours | Capacitance Change: 20% of initial; tan 1.5x item 4.4; ESR 1.5x item 4.5; Leakage Current item 4.3; Appearance: No notable changes. |
| Surge Test | Condition: Surge voltage via 1k resistor, 305s, 1000 cycles | Capacitance Change: 20% of initial; tan 1.5x item 4.4; ESR 1.5x item 4.5; Leakage Current item 4.3 |
| Damp Heat Test | Condition: 90-95%RH, 602, 100048 hours | Capacitance Change: 20% of initial; tan 1.5x item 4.4; ESR 1.5x item 4.5; Leakage Current item 4.3; Appearance: No notable changes. |
| Maximum Permissible Ripple Current | Condition: 100kHz, at max operating temperature | See Table 3 (not provided) |
| Rapid Change of Temperature | Condition: 5 cycles (-55 to 105) | Capacitance change: 10% of initial; tan item 4.4; Leakage current item 4.3 (after voltage treatment) |
| Lead Strength | Lead Pull (d0.5mm): 5N (101s); Lead Bending (d0.5mm): 2.5N (2-3s) | Leakage current item 4.3; Outward Appearance: No cutting/slack of lead terminals. |
| Resistance to Vibration | Condition: 10-55Hz (1min interval), 0.75mm amplitude, X,Y,Z axes, 2 hours/axial | Capacitance difference within 5% of initial value. |
| Solderability | Condition: Sn-3Ag-0.5Cu, 2453C, 30.5s immersion | 95% of dipped terminal covered with new solder. |
| Resistance to Soldering Heat | Solder bath: Sn-3Ag-0.5Cu, 2605C, 101s immersion (t=1.6mm heat protector); Soldering iron: 40010C | (Performance criteria not fully detailed in source) |
| Operating Temperature Range | Continuous operation at rated voltage | -55C to 105C |
2410121457_Man-Yue-Tech-ULR337M0JE06RR_C840175.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
