<
>
Specifications
Lifetime:
3000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
470uF
Height - Seated (Max):
12mm
Pin Spacing:
3.5mm
Voltage Rating:
16V
Diameter:
8mm
Ripple Current:
736mA
Tolerance:
±20%
Mfr. Part #:
R00LRS1C471F012M00
Package:
Through Hole,D8xL12mm
Key Attributes
Model Number:
R00LRS1C471F012M00
Product Description
Product Overview
The LRS series aluminum electrolytic capacitors from Jiang Xi Lian Sheng Electronic CO.,LTD. are designed for reliable performance in electronic equipment. These polar aluminum electrolytic capacitors (foil type) comply with IEC60384 standards and are RoHS compliant. They offer a wide operating temperature range of -40 to +105 and are suitable for applications requiring stable capacitance and low leakage current.
Product Attributes
- Brand: LSTL (Trademark)
- Manufacturer: Jiang Xi Lian Sheng Electronic CO.,LTD. (4321 )
- Origin: China
- Series: LRS
- Compliance: IEC-60384, ROHS (2002/95/EC)
- Case Color: Coffee with gold lettering
Technical Specifications
| LIAN SHENG (P/N) | Series | Rated Voltage (V) | Capacitance (uF) | Capacitance Tolerance (%) | Dissipation Factor Max (%) | Leakage Current (uA) 2min | Case Size (mm) | Category Temperature Range () | Load Life (105) | Ripple Current 105 (mA) |
|---|---|---|---|---|---|---|---|---|---|---|
| R00LRS1E102G017M00 | LRS | 25 | 1000 | -20+20 | 12 | 250 | 10*17 | -40+105 | 7000H | 1402 (at 100KHz) |
| R00LRS1C471F012M00 | LRS | 16 | 470 | -20+20 | 16 | 75.2 | 8*12 | -40+105 | 7000H | 736 (at 100KHz) |
General Characteristics
| Item | Characteristics |
|---|---|
| Operating Temperature Range | -40~+105 |
| Rated Working Voltage Range | 6.3V~100V |
| Capacitance Tolerance | -20%+20% |
| Dissipation Factor (tg) at 20, 120Hz | See table below (Increases by 0.02 for each 1000F increase over 1000F) |
| Leakage Current (MAX) at 20, 2 min application of rated voltage | I0.01CRUR or 3A |
| Load Life (105) | 7000h (Complied to RoHS) |
| Shelf Life (105) | 1000h |
| UR (V) | tg (MAX) |
|---|---|
| 6.3 | 0.22 |
| 10 | 0.19 |
| 16 | 0.18 |
| 25 | 0.14 |
| 35 | 0.12 |
| 50 | 0.10 |
| 63 | 0.09 |
| 80 | 0.08 |
| 100 | 0.08 |
Electrical Characteristics
| Item | Test Method | Specification |
|---|---|---|
| Capacitance | Frequency: 120Hz12Hz; Voltage: 0.5Vrms+0.5VDC2.0VDC | See specification of this series |
| Leakage Current | DC leakage current measured after 1-2 minutes application of DC rated working voltage through 1000 resistor. | See specification of this series |
| Temperature Characteristics | Capacitance and impedance measured at various temperatures (-40, -25, 20, 105) | Capacitance change: Within 20% of initial measured value; Dissipation Factor: Less than specified value. |
| Surge Test | Rated surge voltage applied for 305 sec, repeated for 1000 cycles. | Capacitance change: Within 20% of initial specified value; Dissipation factor: Less than 200% of initial specified value; Leakage current: Within initial specified value. |
Mechanical Characteristics
| Item | Test Method | Specification |
|---|---|---|
| Lead Strength (Tensile) | Constant tensile force applied for 10 seconds. | See table for different lead diameters (0.5kg to 2.0kg). No mechanical or electrical damage. |
| Lead Strength (Bending) | Axial load applied, rotated from vertical to horizontal and back. | See table for different lead diameters/cross-section areas (0.25kg to 2.5kg). No performance change or damage. |
| Vibration Resistance | 10-55 Hz frequency, 1.5mm amplitude, 1 min cycle, 2 hours in 3 perpendicular directions. | Capacitance: stable; Appearance: no abnormal; Capacitance change: Within 5% of initial measured value. |
| Solder Ability | Leads dipped in solder at 260C 5C for 20.5 seconds. | Solder alloy covers 95% or more of dipped lead surface. |
Reliability
| Item | Test Method | Specification |
|---|---|---|
| Soldering Heat Resistance | Leads immersed in solder at 260C 5C for 101 seconds (1.5mm from case). | No visible damage or electrolyte leakage. Capacitance change: Within 5% of initial measured value. Tan : Less than specified value. Leakage current: Less than specified value. |
| Damp Heat (Steady State) | 40C 2C and 90% to 95% RH for 2408 hours. | Capacitance change: Within 5% of initial measured value. Tan : Less than specified value. Leakage current: Less than specified value. |
| Load Life | 7000 hours continuous application of DC rated working voltage at 105. Measurements after 24 hours at room temperature and 2 min application of rated voltage. | Standard of judgment according to this series requirement. |
| Shelf Life | 1000 hours at 105 without voltage application. Measurements after 24 hours at room temperature and 2 min application of rated voltage. | See specification of this series. |
| Storage at Low Temperature | -25 3 for 964 hours (no voltage). Followed by 16 hours in standard atmosphere. | Capacitance change: Within 20% of initial measured value. Tan : Less than specified value. Leakage current: Less than specified value. Appearance: no abnormal. |
| Pressure Relief (Explosion Proof) | AC Test: Applied voltage not exceeding 0.7 times rated DC voltage or 250V AC (whichever is lower) at 50/60Hz. DC Test: Specified current applied while applying inverse voltage. | Pressure relief device shall open to prevent explosion or flying metal parts. Applies to capacitors with diameter 6mm. |
Material Composition
| Part Name | Material | Main Supplier |
|---|---|---|
| Anode Foil (+) | Aluminum | HongYuan, Haixin |
| Cathode Foil (-) | Aluminum | Feile |
| Separator Paper | Wood pulp paper | Kaien |
| Aluminum Case | 99.5% Al | Anqili/Aoxin |
| Sleeve | PET (Poly vinyl chloride) | Yunling |
| Guide Pin | Aluminum + CP wire | Xingsheng |
| Colloidal Particles | Synthetic rubber (IIR) | Lianhuaxin |
| Electrolyte | Glycol + organic acid salt | Haotai |
Guidelines For Using Aluminum Electrolytic Capacitor
- Polarity: DC electrolytic capacitors are polarized. Ensure correct polarity to avoid damage. Not for AC application.
- Bipolar Capacitors: For pulse and polarity-reversal circuits only. Not for pure AC or high ripple current.
- Operating Voltage: Do not exceed rated voltage. Recommended working voltage is 70-80% of rated voltage for extended life.
- Ripple Current: Do not exceed allowable ripple current to prevent overheating and damage. Generally not more than 80% of rated current.
- Fast Charge/Discharge: Use specially designed capacitors for circuits with frequent charge/discharge cycles.
- Operating Temperature: Characteristics vary with temperature. Lower temperatures ensure longer life.
- Temperature and Life: Life is approximately doubled for every 10 reduction in temperature from the rated temperature.
- Operating Frequency: Capacitance decreases and tg increases with higher frequencies.
- Long Storage: Apply rated DC voltage gradually before use for capacitors stored for a long time to restore leakage current and withstand voltage.
- Case Insulation: The capacitor case is not insulated from the cathode terminal. Insulation measures are required at the mounting point if case insulation is necessary.
- Terminal Force: Do not apply excessive force to terminals or leads to prevent breakage or internal connection failure.
- Circuit Board Cleaning: Use recommended cleaning solvents (e.g., methanol, isopropanol). Avoid halogenated solvents.
- Soldering: Maintain distance from plastic sleeve. Recommended solder bath temperature: within 260, duration: not exceeding 10 seconds.
- Hole Layout: Ensure hole spacing on PCBs matches lead spacing to avoid stress on leads. Consider solder splashing during manufacturing.
2411272000_LSTL-R00LRS1C471F012M00_C7421186.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
