<
>
Specifications
Power(Watts):
333mW
Resistance:
750mΩ
Temperature Coefficient:
-250ppm/℃~+500ppm/℃
Operating Temperature:
-55℃~+125℃
Type:
Thick Film Resistor
Tolerance:
±1%
Mfr. Part #:
CR1210F3R750G
Package:
1210
Key Attributes
Model Number:
CR1210F3R750G
Product Description
Product Overview
This specification covers lead-free thick film chip resistors for use in electronic systems. These resistors offer a wide range of resistance values, tolerances, and power ratings, suitable for various applications.
Product Attributes
- Brand: Not specified
- Origin: Not specified
- Material: Ceramic substrate (Al2O3), Conductive layer (Ag), Side conductive layer (NiCr), Resistive layer (RuO2 + glass), Inner protective layer (Glass), Protective layer (Epoxy), Marking (Epoxy), Termination barrier layer (Ni), Termination layer (Matte Tin)
- Color: Not specified
- Certifications: Not specified
Technical Specifications
| Type | Rated Power at 70 | Max. Working Voltage | Max. Overload Voltage | Resistance Range (E96) | Resistance Range (E24) | Tolerance | T.C.R (ppm/) | Max. Rated Current |
| CR0201 | 1/20W | 25V | 50V | 25~10M | 1~10M | 0.5% (D), 1% (F), 2% (G), 5% (J), 10% (K), 20% (M) | 250 | 0.5A |
| CR0402 | 1/16W | 50V | 100V | 10~10M | 1~22M | 0.5% (D), 1% (F), 2% (G), 5% (J), 10% (K), 20% (M) | 100 | 1A |
| CR0603 | 1/10W | 50V | 100V | 10~10M | 1~22M | 0.5% (D), 1% (F), 2% (G), 5% (J), 10% (K), 20% (M) | 100 | 1A |
| CR0805 | 1/8W | 150V | 300V | 10~10M | 1~22M | 0.5% (D), 1% (F), 2% (G), 5% (J), 10% (K), 20% (M) | 100 | 1.5A |
| CR1206 | 1/4W | 200V | 400V | 10~10M | 1~22M | 0.5% (D), 1% (F), 2% (G), 5% (J), 10% (K), 20% (M) | 100 | 1.9A |
| CR1210 | 1/3W | 200V | 400V | 10~10M | 1~22M | 0.5% (D), 1% (F), 2% (G), 5% (J), 10% (K), 20% (M) | 100 | 2.2A |
| CR2010 | 1/2W | 200V | 400V | 10~10M | 1~22M | 0.5% (D), 1% (F), 2% (G), 5% (J), 10% (K), 20% (M) | 100 | 3A |
| CR2512 | 1W | 200V | 400V | 10~10M | 1~22M | 0.5% (D), 1% (F), 2% (G), 5% (J), 10% (K), 20% (M) | 100 | 3A |
| Jumper | N/A | N/A | N/A | 1~25 | 1~25 | N/A | N/A | 0.5A (CR0201), 1A (CR0402-CR1210), 1.9A (CR1206), 3A (CR2010, CR2512) |
| Type | Dimensions (mm) L x W x T | E (mm) | e (mm) |
| CR0201 | 0.60 x 0.30 x 0.23 | 0.150.05 | 0.150.05 |
| CR0402 | 1.00 x 0.50 x 0.35 | 0.150.10 | 0.200.10 |
| CR0603 | 1.60 x 0.80 x 0.45 | 0.250.20 | 0.300.20 |
| CR0805 | 2.00 x 1.25 x 0.50 | 0.350.20 | 0.400.20 |
| CR1206 | 3.10 x 1.60 x 0.55 | 0.450.25 | 0.400.25 |
| CR1210 | 3.10 x 2.50 x 0.55 | 0.350.25 | 0.600.35 |
| CR2010 | 5.00 x 2.50 x 0.55 | 0.650.25 | 0.500.25 |
| CR2512 | 6.25 x 3.10 x 0.55 | 0.850.25 | 0.950.25 |
| Test Description | Specification Limits | Test Methods |
| Temperature Coefficient (over 10ohm) | 200 ppm/ Max. | JIS C5202 |
| Temperature Coefficient (lower 10ohm) | +500-250 ppm/ Max. | |
| Short Time Overload | (1.00%+0.05ohm) Max. | JIS C5202 |
| Resistance to Soldering Heat | (1.00%+0.05ohm)Max. | JIS C5202 |
| Solderability | 95% Coverage Min. | JIS C5202 |
| Load Life | (3.00%+0.05ohm)Max. | JIS C5202 |
| Load Life Humidity | (2.00%+0.05ohm)Max. | JIS C5202 |
| Temperature Cycle | (2.00%+0.05ohm)Max. | JIS C5202 |
| Component high temperature resistance | (1.00%+0.05ohm) Max. | <260 10second 3times |
| Component rework/hand soldering temperature resistance | Approx. 350 for 3seconds | Avoid solder iron tip direct touch the components body |
| MSL (moisture sensitive level) | Level 1 | J-STD-020C |
2410121258_LIZ-CR1210F3R750G_C5146076.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
