<
>
Specifications
Lifetime:
3000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
47uF
Height - Seated (Max):
25mm
Voltage Rating:
400V
Pin Spacing:
7.5mm
Diameter:
16mm
Ripple Current:
370mA
Tolerance:
±20%
Mfr. Part #:
R0288H2G470L025M00
Package:
Through Hole,D16xL25mm
Key Attributes
Model Number:
R0288H2G470L025M00
Product Description
Product Overview
The CD288H series from Jiang Xi Lian Sheng Electronic CO.,LTD. offers a range of polar aluminum electrolytic capacitors designed for electronic equipment. These capacitors are compliant with ROHS directives and meet IEC60384 quality standards. They are suitable for applications requiring reliable performance with a category temperature range of -40~+105 and a load life of 3000 hours at 105. Key features include a capacitance tolerance of -20% to +20% and a maximum operating temperature of 105C.
Product Attributes
- Brand: LSTL (Jiang Xi Lian Sheng Electronic CO.,LTD.)
- Origin: China
- Material: Aluminum foil, separator paper, aluminum case, PET sleeve, aluminum+CP wire leads, synthetic rubber colloidal particles, electrolyte (glycol+organic acid salt).
- Certifications: ROHS compliant.
- Marking Details: Nominal capacitance, rated voltage, polarity mark, series symbol (CD288H), trademark (LSTL), maximum operating temperature (105C), annual mark.
- Sleeve Color: Black with white lettering.
Technical Specifications
| LIAN SHENG (P/N) | Series | Rated Voltage (V) | Capacitance (uF) | Capacitance Tolerance (%) | Case Size (mm) | Dissipation Factor Max (%) | Leakage Current (uA) 2min | Category Temperature Range () | Load Life (105) |
|---|---|---|---|---|---|---|---|---|---|
| R0288H1E470D011M00 | CD288H | 25 | 47 | -20+20 | 5*11 | 14 | 11.75 | -40+105 | 3000H |
| R0288H1H220D011M00 | CD288H | 50 | 22 | -20+20 | 5*11 | 10 | 11.0 | -40+105 | 3000H |
| R0288H1H4R7D011M00 | CD288H | 50 | 4.7 | -20+20 | 5*11 | 10 | 3.0 | -40+105 | 3000H |
| R0288H1V470D011M00 | CD288H | 35 | 47 | -20+20 | 5*11 | 12 | 16.45 | -40+105 | 3000H |
| R0288H1C101D011M00 | CD288H | 16 | 100 | -20+20 | 5*11 | 16 | 16.0 | -40+105 | 3000H |
| R0288H1E101D011M00 | CD288H | 25 | 100 | -20+20 | 5*11 | 14 | 25.0 | -40+105 | 3000H |
| R0288H1A100D011M00 | CD288H | 100 | 10 | -20+20 | 5*11 | 8 | 10.0 | -40+105 | 3000H |
| R0288H1E221E9R0M00 | CD288H | 25 | 220 | -20+20 | 6*9 | 14 | 55.0 | -40+105 | 3000H |
| R0288H1C221A011M00 | CD288H | 16 | 220 | -20+20 | 6*11 | 16 | 35.2 | -40+105 | 3000H |
| R0288H1L101A011M00 | CD288H | 35 | 100 | -20+20 | 6*11 | 12 | 35.0 | -40+105 | 3000H |
| R0288H1H470A011M00 | CD288H | 50 | 47 | -20+20 | 6*11 | 10 | 23.5 | -40+105 | 3000H |
| R0288H1C471F012M00 | CD288H | 16 | 470 | -20+20 | 8*12 | 16 | 75.2 | -40+105 | 3000H |
| R0288H1E471F012M00 | CD288H | 25 | 470 | -20+20 | 8*12 | 14 | 117.5 | -40+105 | 3000H |
| R0288H1H101F012M00 | CD288H | 50 | 100 | -20+20 | 8*12 | 10 | 50.0 | -40+105 | 3000H |
| R0288H1C102F016M00 | CD288H | 16 | 1000 | -20+20 | 8*16 | 16 | 160.0 | -40+105 | 3000H |
| R0288H1E681F016M00 | CD288H | 25 | 680 | -20+20 | 8*16 | 14 | 170.0 | -40+105 | 3000H |
| R0288H1E471G012M00 | CD288H | 25 | 470 | -20+20 | 10*12 | 14 | 117.5 | -40+105 | 3000H |
| R0288H1E681G016M00 | CD288H | 25 | 680 | -20+20 | 10*16 | 14 | 170.0 | -40+105 | 3000H |
| R0288H1E102G017M00 | CD288H | 25 | 1000 | -20+20 | 10*17 | 14 | 250.0 | -40+105 | 3000H |
| R0288H1V471G017M00 | CD288H | 35 | 470 | -20+20 | 10*17 | 12 | 164.5 | -40+105 | 3000H |
| R0288H1C152G020M00 | CD288H | 16 | 1500 | -20+20 | 10*20 | 16 | 240.0 | -40+105 | 3000H |
| R0288H1H471G020M00 | CD288H | 50 | 470 | -20+20 | 10*20 | 10 | 235.0 | -40+105 | 3000H |
| R0288H1V102G020M00 | CD288H | 35 | 1000 | -20+20 | 10*20 | 12 | 350.0 | -40+105 | 3000H |
| R0288H1E222W020M00 | CD288H | 25 | 2200 | -20+20 | 12.5*20 | 16 | 550.0 | -40+105 | 3000H |
| R0288H1H102W025M00 | CD288H | 50 | 1000 | -20+20 | 12.5*20 | 10 | 500.0 | -40+105 | 3000H |
| R0288H1C472L025M00 | CD288H | 16 | 4700 | -20+20 | 16*25 | 22 | 752.0 | -40+105 | 3000H |
| R0288H2G4R7F012M00 | CD288H | 400 | 4.7 | -20+20 | 8*12 | 20 | 47.6 | -40+105 | 3000H |
| R0288H2W100G017M00 | CD288H | 450 | 10 | -20+20 | 10*17 | 20 | 145.0 | -40+105 | 3000H |
| R0288H2G220W020M00 | CD288H | 400 | 22 | -20+20 | 12.5*20 | 20 | 186.0 | -40+105 | 3000H |
| R0288H2G330W020M00 | CD288H | 400 | 33 | -20+20 | 12.5*20 | 20 | 274.0 | -40+105 | 3000H |
| R0288H2G470W020M00 | CD288H | 400 | 47 | -20+20 | 12.5*20 | 20 | 386.0 | -40+105 | 3000H |
| R0288H2G470L020M00 | CD288H | 400 | 47 | -20+20 | 16*20 | 20 | 386.0 | -40+105 | 3000H |
| R0288H2G560W025M00 | CD288H | 400 | 56 | -20+20 | 12.5*25 | 20 | 458.0 | -40+105 | 3000H |
| R0288H2G470L025M00 | CD288H | 400 | 47 | -20+20 | 16*25 | 20 | 386.0 | -40+105 | 3000H |
| R0288H2G680L025M00 | CD288H | 400 | 68 | -20+20 | 16*25 | 20 | 554.0 | -40+105 | 3000H |
| R0288H2G820L025M00 | CD288H | 400 | 82 | -20+20 | 16*25 | 20 | 666.0 | -40+105 | 3000H |
| R0288H2G101L030M00 | CD288H | 400 | 100 | -20+20 | 16*30 | 20 | 810.0 | -40+105 | 3000H |
| R0288H2G101M025M00 | CD288H | 400 | 100 | -20+20 | 18*25 | 20 | 810.0 | -40+105 | 3000H |
| R0288H2G121M030M00 | CD288H | 400 | 120 | -20+20 | 18*30 | 20 | 970.0 | -40+105 | 3000H |
| R0288H2G151M032M00 | CD288H | 400 | 150 | -20+20 | 18*32 | 20 | 1210 | -40+105 | 3000H |
Technical Requirements
| Item | Characteristics | Test Method | Specification |
|---|---|---|---|
| Operating Temperature Range | -40~+105 | - | - |
| Rated Working Voltage Range | 6.3V~500V | - | - |
| Capacitance Tolerance | -20%+20% (M) | 20, 120Hz | - |
| Dissipation Factor (MAX) | (tg) | 20 , 120Hz | UR(V) 6.3:0.24, 10:0.20, 16:0.16, 25:0.14, 35:0.12, 50:0.10, 63:0.08, 100:0.08, 160:0.15, 200:0.15, 250:0.15, 350:0.20, 400:0.20, 450:0.20, 500:0.20 |
| Impedance Ratio (MAX) | Z(-40)/ Z(+20) | 120Hz | 6.3to10:7, 16:5, 25to100:8, 160to250:8, 350to450:8, 500:10 |
| Leakage Current (MAX) | (at 20 after 2 minutes) | - | 6.3to100Vdc: I0.01CV or 3uA whichever is greater; 160to400Vdc: I0.02CV+ 10A; 450to500Vdc: I 0.03CV + 10A |
| Load Life | 105, 3000h | DC voltage with rated ripple current applied | Leakage current Initial specified value; Dissipation Factor tg 200% of initial specified value; Capacitance change 20% of initial value. |
| Shelf Life | 105, 1000h | Voltage treatment based on JIS C 5101-4 clause 4.1 at 20 after exposure | Leakage current 200% of initial specified value; Dissipation Factor tg 200% of initial specified value; Capacitance change 20% of initial value. |
Electrical Characteristics
| Item | Test Method | Specification |
|---|---|---|
| Rated Voltage | - | Refer to series specification |
| Capacitance | Measuring frequency: 120Hz12Hz; Measuring voltage: 0.5Vrms+0.5VDC2.0VDC | - |
| Dissipation Factor / Leakage Current | - | See specification of this series |
| Leakage Current | DC rated working voltage applied for 1-2 minutes through 1000 resistor | - |
| Temperature Characteristics | Step 1: 202 (30min); Step 2: 103, -253 (2 hours); Step 3: 202 (15min); Step 4: 1052 (2 hours) | Capacitance and Impedance (|Z|, 20, 120HZ10%); Impedance at thermal equilibrium (|Z|, -40, -25, 120HZ10%); Capacitance at thermal equilibrium; Low temperature Impedance stability < Specified value; Capacitance change: 20% of initial measured value; Dissipation Factor < Specified value. |
| Surge Test | Rated surge voltage applied for 305 sec, then discharge for 50.5 min. Cycle repeated 1000 times. | Capacitance change: 20% of initial specified value; Dissipation factor: < 200% of initial specified value; Leakage current: < Initial specified value. |
Mechanical Characteristics
| Item | Test Method | Specification |
|---|---|---|
| Lead Strength (Tensile) | Constant tensile force applied for 10 seconds. | Wire lead terminal (d0.45): 0.5kg; (0.5-0.8): 1.0kg; (0.8-d1.25): 2.0kg. Snap-in terminal: 2.0kg. |
| Lead Strength (Bending) | Axial load applied to each lead, capacitor rotated from vertical to horizontal and back. | Wire lead terminal (d0.45): 0.25kg; (0.5-0.8): 0.5kg; (0.8d1.25): 1.0kg. Snap-in terminal (0.5S1): 1.0kg; (S>1): 2.5kg. |
| Vibration Resistance | Frequency 10-55 Hz, amplitude 1.5mm, 1 min/cycle. Vibrated in 3 mutually perpendicular directions for 2 hours each. | Capacitance: Stable; Appearance: No abnormal; Capacitance change: 5% of initial measured value. |
| Solder Ability | Leads dipped in solder bath (Sn-Ag-Cu) at 260C 5C for 20.5 seconds. | Solder alloy covers 95% or more of dipped lead surface. |
Reliability
| Item | Test Method | Specification |
|---|---|---|
| Soldering Heat Resistance | Leads immersed in solder bath at 270C 5C for 101 seconds, 1.5mm from case. | No visible damage or electrolyte leakage. Capacitance change: 5% of initial measured value. Tan S: < Specified value. Leakage current: < Specified value. |
| Damp Heat (Steady State) | 40C2, 90% to 95% RH for 2408 hours. | Capacitance change: 5% of initial measured value. Tan S: < Specified value. Leakage current: < Specified value. |
| Load Life | 3000 hours continuous application of DC rated working voltage at 105. Measurements after 24h at room temp and 2 min DC rated voltage application. | Judgment standard according to series requirement. |
| Shelf Life | 1000 hours at 105 without voltage. Measurements after 24h at room temp and 2 min DC rated voltage application. | - |
| Storage at Low Temperature | -25 3 for 964 hours (no voltage). Then 16+ hours in standard atmospheric conditions. | Capacitance change: 20% of initial measured value. Tan S: < Specified value. Leakage current: < Specified value. Appearance: No abnormal. |
| Pressure Relief (AC Test) | Applied voltage: AC voltage 0.7 times rated DC voltage or 250V AC (whichever is lower). Frequency: 50 or 60 Hz. | - |
| Pressure Relief (DC Test) | Applying inverse voltage with specified current. Applies to capacitors with diameter 6mm. | Pressure relief device shall open to prevent explosion or metal piece ejection. |
| Rated Voltage and Surge Voltage | - | RV (V): 6.3, 10, 16, 25, 35, 50, 63, 80, 100, 160, 200, 250, 350, 400, 450, 500. S.V (V): 8, 13, 20, 32, 44, 63, 79, 100, 125, 200, 250, 300, 400, 450, 500, 550. |
Guidelines For Using Aluminum Electrolytic Capacitor
- Polarity: DC electrolytic capacitors are polarized. Ensure correct polarity to avoid damage. Not for AC application. Use bipolar capacitors if polarity is uncertain.
- Bipolar Capacitors: For pulse and polarity reverse circuits only. Not for pure AC or high ripple current circuits.
- Operating Voltage: Do not exceed rated voltage. Recommended working voltage is 70-80% of rated voltage for extended life.
- Ripple Current: Do not exceed permissible ripple current to prevent overheating, capacitance reduction, and damage. Generally not more than 80% of rated current.
- Fast Charge/Discharge: Use specially designed capacitors for circuits with frequent charge/discharge cycles.
- Operating Temperature: Characteristics vary with temperature. Lower temperatures ensure longer life.
- Temperature and Life Relationship: Life doubles for every 10 reduction in temperature. (Formula provided in source).
- Operating Frequency: Capacitance decreases and tg increases with higher frequencies.
- Storage: For capacitors stored long-term, apply rated DC voltage gradually before use to address increased leakage current and reduced withstand voltage.
- Case Insulation: Capacitor case is not insulated from the cathode terminal. Ensure insulation at the mounting point if required.
- Terminal Force: Do not apply excessive force to terminals or leads to prevent breakage or internal damage.
- Circuit Board Cleaning: Use recommended solvents (methanol, isopropanol, ethanol, etc.). Avoid halogenated solvents.
- Soldering: Maintain distance from plastic sleeve. Soldering temperature within 260, duration not exceeding 10 seconds.
- Hole Layout on PCB: Ensure hole spacing matches lead spacing to avoid stress on leads. Consider solder splashing.
2410121256_LSTL-R0288H2G470L025M00_C7421179.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
