<
>
Specifications
Power(Watts):
1W
Resistance:
3.9kΩ
Voltage Rating:
200V
Temperature Coefficient:
±100ppm/℃
Operating Temperature:
-55℃~+125℃
Type:
Thick Film Resistor
Tolerance:
±1%
Mfr. Part #:
CR2512F13901G
Package:
2512
Key Attributes
Model Number:
CR2512F13901G
Product Description
Thick Film Chip Resistors - Type CR
Lead-free thick film chip resistors designed for use in electronics systems.
Product Attributes
- Brand: Not specified
- Origin: Not specified
- Material: Ceramic Substrate (Al2O3), Conductive layer (Ag), Side conductive layer (NiCr), Resistive layer (RuO2 + glass), Inner protective layer (Glass), Protective layer (Epoxy), Marking (Epoxy), Termination barrier layer (Ni), Termination layer (Matte Tin)
- Color: Not specified
- Certifications: Not specified
Technical Specifications
| Type | Rated Power at 70 | Max. Working Voltage | Max. Overload Voltage | Resistance Range (E96/E24) | Tolerance Symbol | T.C.R (ppm/) | Max. Rated Current (Jumper) |
|---|---|---|---|---|---|---|---|
| CR0201 | 1/20W | 25V | 50V | 1~25 (Jumper), 25~10M | D(0.5%), F(1%), G(2%), J(5%), K(10%), M(20%) | 250, +500-250 | 0.5A |
| CR0402 | 1/16W | 50V | 100V | 1~10 (Jumper), 10~1M (E96), 10~22M (E24) | D(0.5%), F(1%), G(2%), J(5%), K(10%), M(20%) | 100, +500-250, 200 | 1A |
| CR0603 | 1/10W | 50V | 100V | 1~10 (Jumper), 10~1M (E96), 10~22M (E24) | D(0.5%), F(1%), G(2%), J(5%), K(10%), M(20%) | 100, +500-250, 200 | 1A |
| CR0805 | 1/8W | 150V | 300V | 1~10 (Jumper), 10~1M (E96), 10~22M (E24) | D(0.5%), F(1%), G(2%), J(5%), K(10%), M(20%) | 100, +500-250, 200 | 1.5A |
| CR1206 | 1/4W | 200V | 400V | 1~10 (Jumper), 10~1M (E96), 10~22M (E24) | D(0.5%), F(1%), G(2%), J(5%), K(10%), M(20%) | 100, +500-250, 200 | 1.9A |
| CR1210 | 1/3W | 200V | 400V | 1~10 (Jumper), 10~10M (E96), 10~22M (E24) | D(0.5%), F(1%), G(2%), J(5%), K(10%), M(20%) | 100, +500-250, 200 | 2.2A |
| CR2010 | 1/2W | 200V | 400V | 1~10 (Jumper), 10~10M (E96), 10~22M (E24) | D(0.5%), F(1%), G(2%), J(5%), K(10%), M(20%) | 100, +500-250, 200 | 3A |
| CR2512 | 1W | 200V | 400V | <0.05 (Zero Ohm Jumper), 10~10M (E96) | D(0.5%), F(1%), G(2%), J(5%), K(10%), M(20%) | 100, +500-250, 200 | 3A |
| Type | Dimensions (mm) L x W x T | EIA-96 Marking Code Multiplier |
|---|---|---|
| CR0201 | 0.60 x 0.30 x 0.23 | Y=10-2, X=10-1, A=100, B=101, C=102, D=103, E=104, F=105 |
| CR0402 | 1.00 x 0.50 x 0.35 | Y=10-2, X=10-1, A=100, B=101, C=102, D=103, E=104, F=105 |
| CR0603 | 1.60 x 0.80 x 0.45 | Y=10-2, X=10-1, A=100, B=101, C=102, D=103, E=104, F=105 |
| CR0805 | 2.00 x 1.25 x 0.50 | Y=10-2, X=10-1, A=100, B=101, C=102, D=103, E=104, F=105 |
| CR1206 | 3.10 x 1.60 x 0.55 | Y=10-2, X=10-1, A=100, B=101, C=102, D=103, E=104, F=105 |
| CR1210 | 3.10 x 2.50 x 0.55 | Y=10-2, X=10-1, A=100, B=101, C=102, D=103, E=104, F=105 |
| CR2010 | 5.00 x 2.50 x 0.55 | Y=10-2, X=10-1, A=100, B=101, C=102, D=103, E=104, F=105 |
| CR2512 | 6.25 x 3.10 x 0.55 | Y=10-2, X=10-1, A=100, B=101, C=102, D=103, E=104, F=105 |
| Environmental Performance | Specification Limits | Test Methods |
|---|---|---|
| Temperature Coefficient (over 10) | 200 ppm/ Max. | JIS C5202 |
| Temperature Coefficient (lower 10) | +500-250 ppm/ Max. | |
| Short Time Overload | (1.00%+0.05) Max. | JIS C5202 |
| Resistance to Soldering Heat | (1.00%+0.05)Max. | JIS C5202 |
| Solderability | 95% Coverage Min. | JIS C5202 |
| Load Life | (3.00%+0.05)Max. | JIS C5202 |
| Load Life Humidity | (2.00%+0.05)Max. | JIS C5202 |
| Temperature Cycle | (2.00%+0.05)Max. | JIS C5202 |
| Component high temperature resistance | (1.00%+0.05) Max. | <260 10seconds 3times |
| Component rework/hand soldering temperature resistance | Avoid solder iron tip direct touch the components body Approx. 350for 3seconds | |
| MSL (moisture sensitive level) | Level 1 | J-STD-020C |
2410121258_LIZ-CR2512F13901G_C5154653.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
