<
>
Specifications
Resistance:
1Ω
Power(Watts):
2W
Operating Temperature:
-55℃~+155℃
Type:
Thick Film Resistor
Tolerance:
±5%
Mfr. Part #:
CH2512JB01R0G
Package:
2512
Key Attributes
Model Number:
CH2512JB01R0G
Product Description
Approval Specification for High Power Thick Film Chip Resistors - Type CH
This specification applies to high power thick film chip resistors of the CH series, which are Pb-free and halogen-free. The products are designed for various applications requiring high power handling capabilities. The resistors feature a thick film construction on a ceramic substrate, with terminations made of silver, nickel, and tin plating.
Product Attributes
- Brand: (LIZHI ELECTRONICS)
- Origin: (Kunshan), (Nantong), Jiangsu Province, China
- Certifications: Pb-free, Halogen-free (RoHS compliant with exemptions)
Technical Specifications
| Type | Size | Rated Power | Tolerance | Resistance Range | Max Working Voltage | Max Overload Voltage | Dielectric Withstanding Voltage | Max Current (0 Ohm Jumper) |
| CH0201 | 0201 | 1/16W | 0.1%, 0.5%, 1%, 2%, 5% | 0.1% (100~1M), 0.5% (10~1M), 1% (1~10M), 2% (1~10M), 5% (1~10M) | 25V | 50V | 75V | 2.79A |
| CH0402 | 0402 | 1/10W | 0.1%, 0.5%, 1%, 2%, 5% | 0.1% (100~1M), 0.5% (10~1M), 1% (1~22M), 2% (1~22M), 5% (1~22M) | 50V | 100V | 150V | 3.53A |
| CH0603 | 0603 | 1/8W | 0.1%, 0.5%, 1%, 2%, 5% | 0.1% (100~1M), 0.5% (10~1M), 1% (1~22M), 2% (1~22M), 5% (1~22M) | 75V | 150V | 220V | 3.95A |
| CH0805 | 0805 | 1/4W | 0.1%, 0.5%, 1%, 2%, 5% | 0.1% (100~1M), 0.5% (10~1M), 1% (1~22M), 2% (1~22M), 5% (1~22M) | 150V | 300V | 430V | 5.59A |
| CH1206 | 1206 | 1/2W | 0.1%, 0.5%, 1%, 2%, 5% | 0.1% (100~1M), 0.5% (10~1M), 1% (1~22M), 2% (1~22M), 5% (1~22M) | 200V | 400V | 570V | 10.00A |
| CH1210 | 1210 | 3/4W | 0.1%, 0.5%, 1%, 2%, 5% | 0.1% (100~1M), 0.5% (10~1M), 1% (1~22M), 2% (1~22M), 5% (1~22M) | 200V | 500V | 710V | 12.00A |
| CH2010 | 2010 | 1W | 0.1%, 0.5%, 1%, 2%, 5% | 0.1% (100~1M), 0.5% (10~1M), 1% (1~22M), 2% (1~22M), 5% (1~22M) | 200V | 500V | 710V | 12.00A |
| CH2512 | 2512 | 2W | 0.1%, 0.5%, 1%, 2%, 5% | 0.1% (100~1M), 0.5% (10~1M), 1% (1~22M), 2% (1~22M), 5% (1~22M) | 200V | 500V | 710V | 16.00A |
Note: Rated voltage is calculated by E = sqrt(P*R). If the calculated voltage exceeds the maximum working voltage for the type, the maximum working voltage shall be regarded as the rated voltage.
Dimensions
| Type | L (mm) | W (mm) | T (mm) | E (mm) | e (mm) |
| CH0201 | 0.600.03 | 0.300.03 | 0.230.03 | 0.100.05 | 0.150.05 |
| CH0402 | 1.000.05 | 0.500.05 | 0.300.05 | 0.150.10 | 0.200.10 |
| CH0603 | 1.600.10 | 0.800.10 | 0.450.10 | 0.250.20 | 0.300.20 |
| CH0805 | 2.000.15 | 1.250.15 | 0.500.10 | 0.350.20 | 0.400.20 |
| CH1206 | 3.100.15 | 1.600.15 | 0.550.10 | 0.450.25 | 0.400.25 |
| CH1210 | 3.100.15 | 2.500.15 | 0.550.15 | 0.350.25 | 0.600.25 |
| CH2010 | 5.000.20 | 2.500.20 | 0.550.15 | 0.650.25 | 0.500.25 |
| CH2512 | 6.250.20 | 3.100.20 | 0.550.15 | 0.850.25 | 0.950.25 |
Marking
Note: 0201 and 0402 sizes have no marking on the body due to their small size.
- 5% Tolerance: 3-digit code. First two digits are significant figures of resistance, third digit is the power of 10 multiplier.
- 0.1%, 0.5%, 1% Tolerance: 4-digit code. First three digits are significant figures of resistance, fourth digit is the power of 10 multiplier.
- 0 Ohm Products: Marked as '000'.
- Resistance below 10: Indicated with 'R' (e.g., 5R6 = 5.6).
- Resistance below 100 (for 1%): Indicated with decimal (e.g., 6R81 = 6.81).
- 0603 1% E96 Series: Uses a 3-digit code due to small body size.
- 0603 1% E24 Series (not E96): Marking is the same as 5% tolerance but with an underline.
Performance Reliability Test Methods
| Item | Test Method | Test Conditions | Specification |
| Temperature Coefficient | JIS C 5201 4.8 | TCR calculation based on resistance at room temperature and test temperature (125 or -55). | 0201: 1R10: -100~+300PPM/; 10 |
| Solderability | JIS C 5201 4.17 | Dip in flux then soldering bath at 2455 for 30.5 sec. | Min 95% coverage |
| Insulation Resistance | JIS C 5201 4.6 | Apply dielectric withstanding voltage on body for 605 sec, then measure insulation impedance. | >10G |
| Dielectric Withstanding Voltage | JIS C 5201 4.7 | Apply dielectric withstanding voltage on body for 605 sec. | No evidence of flashover, arcing or insulation breakdown |
| Short-time Overload | JIS C 5201 4.13 | Apply 2.5 times rated voltage for 5 sec. Measure resistance variation. | (1.0%+0.05) Max |
| Resist to Soldering Heat | JIS C 5201 4.18 | Dip in flux then soldering bath at 2605 for 100.5 sec. Measure resistance variation. | (1.0%+0.05) Max |
| Terminal Bending | JIS C 5201 4.33 | Mounted on test board, bend board for 201s. Bending distance: 5mm (1206), 2mm (>1206). Measure resistance variation. | (1.0%+0.05) Max |
| Temperature Cycling | JIS C 5201 4.19 | Cycle temperature between 1552 and -553 for 5 cycles. Measure resistance variation. | (Specification not fully detailed in source) |
2409271333_LIZ-CH2512JB01R0G_C6333290.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
