<
>
Specifications
Normal temperature Frequency Tolerance:
±30ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
20pF
Equivalent Series Resistance(ESR):
250Ω
Frequency:
3.58MHz
Mfr. Part #:
KUS035802030
Package:
HC-49S
Key Attributes
Model Number:
KUS035802030
Product Description
49US/3.580MHZ
KUS035802030
- (Kaiyuexiang)
- , ()
| 1. GENERAL | ||
| HOLDING TYPE | 49US | |
| MODE OF VIBRATION | AT CUT | |
| OSCILLATION MODE | FUND S&A | |
| TEST FACILITIES | KH-1240 | |
| STORAGE TEMPERATURE | -40 TO +85 | |
| DRIVER LEVEL | 100W | |
| 2. ELECTRICAL PARAMETER | ||
| NORMAL FREQUENCY | 3.580 MHz | |
| FREQUENCY TOLERANCE (252) | 30ppm | |
| TEMPERATURE STABILITY | 20ppm | |
| OPERATING TEMPERATURE RANGE | -20 TO +70 | |
| LOAD CAPACITANCE | 20 PF | |
| MOTIONAL CAPACITANCE | 5PF MAX | |
| SHUNT CAPACITANCE | 250 MAX | |
| EFFECTIVE SERIES RESISTANCE | 500M OHMS MIN | AT DC 100V |
| INSULATION RESISTANCE | 95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | |
| 3. MECHANICAL PARAMETER | ||
| SOLDERABILITY | 95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | |
| Mechanical Endurance | ||
| SHOCK | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. | |
| VIBRATION | Frequency: 1055Hz, Period: 12min, Amplitude: 1.5mm P-P, Direction: X.Y.Z, Time: 2 hours/each direction | Electrical characteristics shall be satisfied after supplying following Vibration. |
| STRENGTH OF TERMINALS/LEAD-WIRES - PULLING | 900g tension weight for 30 sec. | No visual damages on the specimen. |
| STRENGTH OF TERMINALS/LEAD-WIRES - BENDING | 90 degree bending, 225gs tension weight, then straighten gradually. Repeat to opposite direction. | No visual damages on the specimen. |
| SEALING TIGHTNESS | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | |
| SOLDERING DIP | Terminals/lead-wires dipped into solder at +2305 for 3sec. Dipping depth 2mm from body. | Soldering portion shall be covered in over 90% of terminals/lead-wires dipped. |
| SOLDER HEATING | Terminals/lead-wires dipped into solder at +35010 for 3 sec. Dipping depth 2mm from edge. | Electrical characteristics shall be satisfied. |
| Environmental Endurance | ||
| HUMIDITY | 602, 9095% humidity for 250 hours. | Electrical characteristics shall be satisfied. |
| STORAGE IN LOW TEMPERATURE | -302 for 250 hours. | Electrical characteristics shall be satisfied. |
| STORAGE IN HIGH TEMPERATURE | +852 for 250 hours. | Electrical characteristics shall be satisfied. |
| TEMPERATURE CYCLE | 3 cycles. Temperature shift 1/min. | Electrical characteristics shall be satisfied. |
TEL0755-89315823 / 89315866
FAX0755-89315223
www.kaiyuexiang.com
2409272230_KYX-KUS035802030_C18213343.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
