<
>
Specifications
Normal temperature Frequency Tolerance:
±30ppm
Frequency Stability:
±20ppm
Load Capacitance:
12pF
Operating Temperature:
-20℃~+70℃
Equivalent Series Resistance(ESR):
250Ω
Frequency:
8MHz
Mfr. Part #:
KUS080001230
Package:
HC-49S
Key Attributes
Model Number:
KUS080001230
Product Description
- HC-49SJJ/8.000MHZ
HC-49SJJ/8.000MHZ
- : (Kaiyuexiang)
- :
- : HC-49SJJ/8.000MHZ
- : KUS080001230
- :
| 1. GENERAL | |||
| HOLDER TYPE | 49US AT CUT | ||
| MODE OF VIBRATION | FUND S&A | ||
| OSCILLATION MODE | KH-1240 | ||
| TEST FACILITIES | |||
| STORAGE TEMPERATURE | -40 TO +85 | ||
| DRIVER LEVEL | 100W | ||
| 2. ELECTRICAL PARAMETER | |||
| NORMAL FREQUENCY | 8.000 | MHz | |
| FREQUENCY TOLERANCE252 | 30 | ppm | |
| TEMPERATURE STABILITY | 20 | ppm | |
| OPERATING TEMPERATURE RANGE | -20 TO +70 | ||
| LOAD CAPACITANCE | 12 | PF | |
| MOTIONAL CAPACITANCE | 3 | PF MAX | |
| SHUNT CAPACITANCE | |||
| EFFECTIVE SERIES RESISTANCE | 250 | MAX | |
| INSULATION RESISTANCE | 500 | M OHMS MIN | AT DC 100V |
| 3. MECHANICAL PARAMETER | |||
| SOLDERABILITY | 95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | ||
| Mechanical Endurance | |||
| SHOCK | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board. | ||
| VIBRATION | Electrical characteristics shall be satisfied after supplying following Vibration. (1)VIBRATION FREQUENCY 1055Hz (2)REPEATED PERIOD 12min (3)FULL CYCLE 1.5mm PP (4)DIRECTION X.Y.Z (5)TIME 2hours/each direction | ||
| STRENGTH OF TERMINALS/LEADWIRES | PULLING: 900g tension weight for 30 sec. No visual damages. BENDING: 90degree bending with 225gs tension weight. No visual damages. | ||
| SEALING TIGHTNESS | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | ||
| SOLDERING DIP | Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped. | (After applying ROSIN flux) | |
| SOLDER HEATING | Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec. Dipping depth 2mm from edge of terminals/lead-wires. Electrical characteristics shall be satisfied. | ||
| II ENVIRONMENTAL ENDURANCE | |||
| HUMIDITY | Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours. | ||
| STORAGE IN LOW TEMPERATURE | Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours. | ||
| STORAGE IN HIGH TEMPERATURE | Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours. | ||
| TEMPERATURE CYCLE | Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles). Temperature shift from low to high, high to low shall be done in 1/min. | (Refer to Fig-2) | |
2409272230_KYX-KUS080001230_C18213356.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
