<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
20pF
Equivalent Series Resistance(ESR):
60Ω
Frequency:
13.52127MHz
Mfr. Part #:
KUS13521272020
Package:
HC-49S
Key Attributes
Model Number:
KUS13521272020
Product Description
49US/13.52127MHZ20PPM20PPM-20+70
- : (Kaiyuexiang)
- :
- :
- : KUS13521272020
| 1. GENERAL () | ||
| HOLDING TYPE | 49US | |
| MODE VIBRATION | AT CUT | |
| OSCILLATION MODE | FUND S&A | |
| TEST FACILITIES | KH-1240 | |
| STORAGE TEMPERATURE | -40 TO +85 | |
| DRIVER LEVEL | 100W | |
| 2. ELECTRICAL PARAMETER () | ||
| NORMAL FREQUENCY | 13.52127MHz | |
| FREQUENCY TOLERANCE(252) | 20ppm | |
| TEMPERATURE STABILITY | 20ppm | |
| OPERATING TEMPERATURE RANGE | -20 TO +70 | |
| LOAD CAPACITANCE | 20 PF | |
| MOTIONAL CAPACITANCE | 7PF MAX | |
| SHUNT CAPACITANCE | ||
| EFFECTIVE SERIES RESISTANCE | 40MAX | |
| INSULATION RESISTANCE | 500M OHMS MIN AT DC 100V | |
| 3. MECHANICAL PARAMETER () | ||
| SOLDERABILITY | 95%COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | |
| Mechanical Endurance () | ||
| SHOCK () | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board. | |
| VIBRATION () | VIBRATION FREQUENCY: 1055Hz, REPEATED PERIOD: 12min, FULL AMPLITUDE: 1.5mm PP, DIRECTION: X.Y.Z, TIME: 2hours/each direction | Electrical characteristics shall be satisfied after supplying following Vibration. |
| STRENGTH OF TERMINALS/LEAD-WIRES () | -1 PULLING: 900g tension weight for 30 sec. No visual damages. -2 BENDING: 90 degree bending with 225g tension weight, then straighten. Repeat in opposite direction. No visual damages. | |
| SEALING TIGHTNESS () | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | |
| SOLDERING DIP () | Terminals/lead-wires dipped into solder at +2305 for 3sec. Dipping depth 2mm from bottom of body. Over 90% coverage. | (After applying ROSIN flux) |
| SOLDER HEATING () | Terminals/lead-wires dipped into solder at +35010 for 3 sec. Electrical characteristics shall be satisfied. Dipping depth 2mm from edge of terminals/lead-wires. | |
| Environmental Endurance () | ||
| HUMIDITY () | Electrical characteristics shall be satisfied after 250 hours at 602 in 9095% humidity. | |
| STORAGE IN LOW TEMPERATURE () | Electrical characteristics shall be satisfied after 250 hours at -302. | |
| STORAGE IN HIGH TEMPERATURE () | Electrical characteristics shall be satisfied after 250 hours at +852. | |
| TEMPERATURE CYCLE () | Electrical characteristics shall be satisfied after 3 cycles. Temperature shift rate 1/min. | (Refer to Fig-2) |
: P.4
:
:
TEL0755-89315823 / 89315866
FAX0755-89315223
www.kaiyuexiang.com
:
5
2410121243_KYX-KUS13521272020_C368761.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
