<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
20pF
Equivalent Series Resistance(ESR):
80Ω
Frequency:
12.288MHz
Mfr. Part #:
KBD122882020
Package:
HC-49S-SMD
Key Attributes
Model Number:
KBD122882020
Product Description
Product Overview
The KAIYUE XIANG 49USSMD/12.288MHZ is a Quartz Crystal Resonator designed for electronic applications. It offers precise frequency control with a nominal frequency of 12.288MHz and a frequency tolerance of 20ppm.
Product Attributes
- Brand: KAIYUE XIANG
- Origin: Shenzhen, China
- Product Name: Quartz Crystal Resonator
- Product Model: 49USSMD/12.288MHZ
- Original Manufacturer Model: KBD122882020
Technical Specifications
| Parameter | Value |
|---|---|
| HOLDER TYPE | 49USSMD |
| MODE OF VIBRATION | AT CUT |
| OSCILLATION MODE | FUNDAMENTAL |
| TEST FACILITIES | KH-1240 |
| STORAGE TEMPERATURE | -40 TO +85 |
| DRIVER LEVEL | 100W |
| NORMAL FREQUENCY | 12.288MHz |
| FREQUENCY TOLERANCE (252) | 20ppm |
| TEMPERATURE STABILITY | 20ppm |
| OPERATING TEMPERATURE RANGE | -20 TO +70 |
| LOAD CAPACITANCE | 20PF |
| MOTIONAL CAPACITANCE | 7PF |
| SHUNT CAPACITANCE | MAX 40 |
| EFFECTIVE SERIES RESISTANCE | 500M OHMS MIN AT DC 100V |
| INSULATION RESISTANCE | 95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. |
| SOLDERABILITY | AT 245 FOR 5 SEC. |
| SHOCK TEST | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. |
| VIBRATION TEST | Frequency: 1055Hz, Period: 12min, Amplitude: 1.5mm P-P, Direction: X.Y.Z, Time: 2 hours/each direction |
| STRENGTH OF TERMINALS/LEADWIRES (PULLING) | 900g tension weight for 30 sec. No visual damages. |
| STRENGTH OF TERMINALS/LEADWIRES (BENDING) | 90-degree bending with 225g tension weight. No visual damages. |
| SEALING TIGHTNESS | No gas bubble after 5 min in hot water at +90+95. |
| SOLDERING DIP | Dipped into solder at +2305 for 3sec. 90% coverage. |
| SOLDER HEATING | Electrical characteristics shall be satisfied after dipping into solder at +35010 for 3 sec. |
| HUMIDITY TEST | Electrical characteristics shall be satisfied after 250 hours at 602 and 9095% humidity. |
| STORAGE IN LOW TEMPERATURE TEST | Electrical characteristics shall be satisfied after 250 hours at -302. |
| STORAGE IN HIGH TEMPERATURE TEST | Electrical characteristics shall be satisfied after 250 hours at +852. |
| TEMPERATURE CYCLE TEST | Electrical characteristics shall be satisfied after 3 cycles with temperature shift of 1/min. |
2409272303_KYX-KBD122882020_C2835962.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
