<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Frequency Stability:
±20ppm
Load Capacitance:
8.5pF
Operating Temperature:
-20℃~+70℃
Equivalent Series Resistance(ESR):
60Ω
Frequency:
16MHz
Mfr. Part #:
KUS160008.520
Package:
HC-49S
Key Attributes
Model Number:
KUS160008.520
Product Description
Product Overview
This datasheet specifies the Quartz Crystal Resonator, model 49US/16.000MHZ, manufactured by Shenzhen Kaiyuexiang Industrial. It is designed for applications requiring precise frequency control. Key parameters include a load capacitance of 8.5PF and a frequency tolerance of 20PPM.
Product Attributes
- Brand: Kaiyuexiang
- Origin: Shenzhen, China
- Product Name: Quartz Crystal Resonator
- Product Model: 49US/16.000MHZ
- Original Manufacturer Model: KUS160008.520
- Factory Address: 4th Floor, Building 1, Caifa Industrial City, Renmin Road, Guanlan, Bao'an District, Shenzhen
- Website: www.kaiyuexiang.com
Technical Specifications
| Parameter | Value | Unit |
|---|---|---|
| 1. GENERAL | ||
| Holder Type | 49US | |
| Mode of Vibration | AT CUT | |
| Oscillation Mode | FUND S&A | |
| Test Facilities | KH-1240 | |
| Storage Temperature | -40 to +85 | |
| Driver Level | 100 | W |
| 2. ELECTRICAL PARAMETER | ||
| Normal Frequency | 16.000 | MHz |
| Frequency Tolerance (252) | 20 | ppm |
| Temperature Stability | 20 | ppm |
| Operating Temperature Range | -20 to +70 | |
| Load Capacitance | 8.5 | PF |
| Motional Capacitance | 3 | PF MAX |
| Effective Series Resistance | 80 | MAX |
| Insulation Resistance | 500M | OHMS MIN (at DC 100V) |
| 3. MECHANICAL PARAMETER | ||
| Solderability | 95% Coverage by using 90/10 Sold at 245 for 5 sec. Dipping after immersion in ALPHA 611 Flux for 5 sec. | |
| 4. MECHANICAL ENDURANCE | ||
| Shock Test | Electrical characteristics shall be satisfied after dropping from 50 cm height onto hard wooden board 3 times. | |
| Vibration Test | Frequency: 10-55Hz, Period: 1-2min, Full Amplitude: 1.5mm P-P, Direction: X.Y.Z, Time: 2 hours/each direction | |
| Strength of Terminals/Lead-Wires (Pulling) | 900g tension weight applied axially for 30 sec. No visual damages. | |
| Strength of Terminals/Lead-Wires (Bending) | 90-degree bending with 225g tension weight, then straightened. Repeated in opposite direction. No visual damages. | |
| Sealing Tightness | No gas bubbles observed after specimen in hot water at +90-+95 for 5 min. | |
| Soldering Dip | Terminals dipped into solder at +2305 for 3 sec, 2mm from body. Over 90% coverage. | |
| Solder Heating Resistance | Terminals dipped into solder at +35010 for 3-4 sec. Electrical characteristics shall be satisfied. | |
| 5. ENVIRONMENTAL ENDURANCE | ||
| Humidity Test | Electrical characteristics shall be satisfied after 250 hours at 602 and 90-95% humidity. | |
| Storage in Low Temperature | Electrical characteristics shall be satisfied after 250 hours at -302. | |
| Storage in High Temperature | Electrical characteristics shall be satisfied after 250 hours at +852. | |
| Temperature Cycle | Electrical characteristics shall be satisfied after 3 cycles with temperature shift at 1/min. | |
2409272303_KYX-KUS160008-520_C2875583.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
