<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Frequency Stability:
±20ppm
Load Capacitance:
8.5pF
Operating Temperature:
-20℃~+70℃
Equivalent Series Resistance(ESR):
60Ω
Frequency:
16MHz
Mfr. Part #:
KUS160008520
Package:
HC-49S
Key Attributes
Model Number:
KUS160008520
Product Description
Product Overview
This specification document details the Quartz Crystal Resonator, model 49US/16.000MHZ, manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. It is designed for oscillation with specific electrical and mechanical parameters, including a nominal frequency of 16.000 MHz and a load capacitance of 8.5 PF.
Product Attributes
- Brand: (Kaiyuexiang)
- Origin: Shenzhen, China
- Product Name: (Quartz Crystal Resonator)
- Manufacturer: (Shenzhen Kaiyuexiang Electronics Co., Ltd.)
- Original Manufacturer Model: KUS160008520
Technical Specifications
| Parameter | Specification | Value |
| GENERAL | HOLDER TYPE | 49US |
| MODE OF VIBRATION | AT CUT | |
| OSCILLATION MODE | FUND S&A | |
| TEST FACILITIES | KH-1240 | |
| STORAGE TEMPERATURE | -40TO +85 | |
| ELECTRICAL PARAMETER | NORMAL FREQUENCY | 16.000 MHz |
| FREQUENCY TOLERANCE252 | 20ppm | |
| TEMPERATURE STABILITY | 20ppm | |
| OPERATING TEMPERATURE RANGE | -20TO +70 | |
| LOAD CAPACITANCE | 8.5 PF | |
| MOTIONAL CAPACITANE | 5PF MAX | |
| SHUNT CAPACITANCE | 60 MAX | |
| EFFECTIVE SERIES RESISTANCE | 500M OHMS MIN | |
| INSULATION RESISTANCE | AT DC 100V | |
| MECHANICAL PARAMETER | SOLDERABILITY | 95%COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. |
| DRIVER LEVEL | 100W | |
| MECHANICAL ENDURANCE | SHOCK | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board. |
| VIBRATION | Frequency: 1055Hz, Amplitude: 1.5mm PP, Duration: 2hours/each direction (X.Y.Z) | |
| STRENGTH OF TERMINALS/LEAD-WIRES (PULLING) | 900g tension weight for 30 sec. No visual damages. | |
| STRENGTH OF TERMINALS/LEAD-WIRES (BENDING) | 90degree bending with 225gs tension weight. No visual damages. | |
| SEALING TIGHTNESS | No gas bubble after specimen put in hot water at +90+95for 5 min. | |
| SOLDERING DIP | Terminals dipped into solder at +2305 for 3sec. Dipping depth 2mm. Over 90% coverage. | |
| ENVIRONMENTAL ENDURANCE | HUMIDITY | Electrical characteristics shall be satisfied after 250 hours at 602, 9095% humidity. |
| STORAGE IN LOW TEMPERATURE | Electrical characteristics shall be satisfied after 250 hours at -302. | |
| STORAGE IN HIGH TEMPERATURE | Electrical characteristics shall be satisfied after 250 hours at +852. | |
| TEMPERATURE CYCLE | TEMPERATURE CYCLE | Electrical characteristics shall be satisfied after 3 cycles. Temperature shift rate 1/min. |
2409272230_KYX-KUS160008520_C18213292.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
