<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Frequency Stability:
±20ppm
Load Capacitance:
11pF
Operating Temperature:
-20℃~+70℃
Equivalent Series Resistance(ESR):
40Ω
Frequency:
24MHz
Mfr. Part #:
KUS240001120
Package:
HC-49S
Key Attributes
Model Number:
KUS240001120
Product Description
Product Specification
Product Name: Quartz Crystal Resonator
Product Model: 49US/24.000MHZ
Original Manufacturer Model: KUS240001120
Brand: Kaiyuexiang ()
Origin: Shenzhen, China
Manufacturer: Shenzhen Kaiyuexiang Electronics Co., Ltd.
Factory Address: 4th Floor, Building 1, Caifa Industrial City, Renmin Road, Guanlan, Longhua District, Shenzhen
Contact: TEL: 0755-89315823 / 89315866, FAX: 0755-89315223
Website: www.kaiyuexiang.com
Technical Specifications
| Parameter | Specification | Notes |
|---|---|---|
| Holder Type | 49US | AT CUT |
| Mode of Vibration | FUND | S&A KH-1240 |
| Oscillation Mode | ||
| Test Facilities | ||
| Storage Temperature | -40 TO +85 | |
| Driver Level | 100W | |
| Normal Frequency | 24.000 MHz | |
| Frequency Tolerance (252) | 20ppm | |
| Temperature Stability | 20ppm | |
| Operating Temperature Range | -20 TO +70 | |
| Load Capacitance | 11 PF | |
| Motional Capacitance | 5PF MAX | |
| Shunt Capacitance | ||
| Effective Series Resistance | 40 MAX | |
| Insulation Resistance | 500M OHMS MIN | AT DC 100V |
| Solderability | 95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | |
| Shock Resistance | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. | |
| Vibration Resistance | Frequency: 1055Hz, Period: 12min, Amplitude: 1.5mm P-P, Direction: X.Y.Z, Time: 2hours/each direction. Electrical characteristics shall be satisfied. | |
| Strength of Terminals/Lead-wires (Pulling) | 900g tension weight for 30 sec. No visual damages. | |
| Strength of Terminals/Lead-wires (Bending) | 90 degree bending with 225g tension weight, then straightened. Repeated in opposite direction. No visual damages. | |
| Sealing Tightness | No gas bubble after specimen put in hot water at +90+95 for 5 min. | |
| Soldering Dip | Terminals/lead-wires dipped into solder at +2305 for 3sec. Dipping depth 2mm from body bottom. Over 90% coverage. | (After applying ROSIN flux) |
| Solder Heating Resistance | Terminals/lead-wires dipped into solder at +35010 for 3 sec. Electrical characteristics shall be satisfied. | Dipping depth 2mm from edge of terminals/lead-wires. |
| Humidity Resistance | Electrical characteristics shall be satisfied after 250 hours at 602 and 9095% humidity. | |
| Low Temperature Storage | Electrical characteristics shall be satisfied after 250 hours at -302. | |
| High Temperature Storage | Electrical characteristics shall be satisfied after 250 hours at +852. | |
| Temperature Cycle | Electrical characteristics shall be satisfied after 3 cycles. Temperature shift 1/min. | (Refer to Fig-2) |
2409272230_KYX-KUS240001120_C18213334.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
