<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
20pF
Equivalent Series Resistance(ESR):
60Ω
Frequency:
16MHz
Mfr. Part #:
KUS160001220
Package:
HC-49S
Key Attributes
Model Number:
KUS160001220
Product Description
- 49US/16.000MHZ
49US/16.000MHZESR
- : (Kaiyuexiang)
- :
- :
- : 49US/16.000MHZ
- : KUS160001220
| (HOLDER TYPE) | 49US |
| (MODE VIBRATION) | FUND |
| (OSCILLATION MODE) | S&A |
| (TEST FACILITIES) | KH-1240 |
| (STORAGE TEMPERATURE) | -40 TO +85 |
| (DRIVER LEVEL) | 100W |
| (NORMAL FREQUENCY) | 16.000MHz |
| (FREQUENCY TOLERANCE @ 252) | 20ppm |
| (TEMPERATURE STABILITY) | 20ppm |
| (OPERATING TEMPERATURE RANGE) | -20 TO +70 |
| (LOAD CAPACITANCE) | 12 PF |
| (MOTIONAL CAPACITANCE) | 7PF |
| (SHUNT CAPACITANCE) | MAX 30MAX |
| (EFFECTIVE SERIES RESISTANCE) | MAX 30 |
| (INSULATION RESISTANCE) | 500M OHMS MIN AT DC 100V |
| (SOLDERABILITY) | 95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. |
| (MECHANICAL ENDURANCE) | |
| (SHOCK) | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board. |
| (VIBRATION) | Frequency: 1055Hz, Period: 12min, Amplitude: 1.5mm PP, Direction: X.Y.Z, Time: 2hours/each direction |
| (STRENGTH OF TERMINALS/LEADWIRES) | Pulling: 900g tension weight for 30 sec. Bending: 90 degree bending with 225g tension weight. |
| (SEALING TIGHTNESS) | No gas bubble observed after 5 min in hot water at +90+95. |
| (SOLDERING DIP) | Dipped into solder at +2305 for 3sec, depth 2mm. Over 90% coverage. |
| (SOLDER HEATING) | Dipped into solder at +35010 for 3 sec. Electrical characteristics shall be satisfied. |
| (HUMIDITY) | Electrical characteristics shall be satisfied after 250 hours at 602 and 9095% humidity. |
| (STORAGE IN LOW TEMPERATURE) | Electrical characteristics shall be satisfied after 250 hours at -302. |
| (STORAGE IN HIGH TEMPERATURE) | Electrical characteristics shall be satisfied after 250 hours at +852. |
| (TEMPERATURE CYCLE) | Electrical characteristics shall be satisfied after 3 cycles. Temperature shift rate: 1/min. |
:
:
TEL: 0755-89315823 / 89315866
FAX: 0755-89315223
: www.kaiyuexiang.com
2410121243_KYX-KUS160001220_C368764.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
