<
>
Specifications
Normal temperature Frequency Tolerance:
±30ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
15pF
Frequency:
12MHz
Mfr. Part #:
K26120001530T
Package:
DT-26
Key Attributes
Model Number:
K26120001530T
Product Description
Product Overview
This specification sheet details the K26120001530T quartz crystal resonator from Kaiyuexiang Electronics Co., Ltd. It is designed for applications requiring precise frequency control, featuring a nominal frequency of 12.000 MHz and a load capacitance of 15 PF.
Product Attributes
- Brand: Kaiyuexiang ()
- Origin: Shenzhen, China
- Product Name: Quartz Crystal Resonator ()
- Product Model: 2*6/12.000MHZJJTG
- Manufacturer Model: K26120001530T
- Factory Address: 4th Floor, Building 1, Caifa Industrial City, Renmin Road, Guanlan, Longhua District, Shenzhen ()
- Contact: TEL: 0755-89315823 / 89315866, FAX: 0755-89315223
- Website: www.kaiyuexiang.com
Technical Specifications
| Parameter | Value | Unit | Conditions |
|---|---|---|---|
| Case Type | 26 | ||
| Vibration Mode | Fundamental | ||
| Nominal Frequency | 12.000 | MHz | |
| Frequency Tolerance | 30 | ppm | at 252 |
| Temperature Frequency Drift | 20 | ppm | |
| Load Capacitance | 15 | PF | |
| Max Equivalent Resistance | 80 | max | |
| Max Static Capacitance | 3.0 | pF | max |
| Drive Level | 100 | W | |
| Aging Rate | 3 | ppmyear | |
| Insulation Resistance | 500 | M | (DC10015V) |
| Test Instrument | 250B | ||
| Free Fall (Shock) | Frequency change 5ppm after 3 drops from 35cm onto 2cm thick board | ppm | |
| Vibration | Frequency variation 20ppm | ppm | 10~55Hz, 0.75mm amplitude, 30 min each in X, Y, Z directions |
| Temperature Cycling | Appearance no damage, performance meets vibration requirements | -10 to +60, 3 cycles (2-3 min transition, 30 min dwell) | |
| Solderability | Tinned surface >95% | % | 2~3.0mm from lead end in 2355 solder bath for 20.5 sec; performance meets vibration requirements |
| Resistance to Soldering Heat | Appearance normal, performance meets vibration requirements | 2~2.5mm from lead end in 250 10 solder bath for 3.50.5 sec | |
| Low Temperature Resistance | Performance meets vibration requirements | -253 for 2 hours, then 2 hours at room temperature | |
| High Temperature Resistance | Performance meets vibration requirements | +702 for 2 hours, then 2 hours at room temperature | |
| Constant Humidity Heat | Appearance normal, performance meets vibration requirements | 403, RH932 for 48 hours, then 2 hours at room temperature | |
| High Temperature Aging | Frequency change 5ppm, Resistance change 25 | ppm, | 1202 for 48 hours, then 2 hours at room temperature |
2310101742_KYX-K26120001530T_C18208967.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
