<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
20pF
Equivalent Series Resistance(ESR):
80Ω
Frequency:
11.0592MHz
Mfr. Part #:
KBD1105922020
Package:
HC-49S-SMD
Key Attributes
Model Number:
KBD1105922020
Product Description
Product Overview
This specification sheet details the 49USSMD quartz crystal resonator, model 49USSMD/11.0592MHZ, manufactured by Shenzhen Kaiyuexiang Industrial. It is designed for applications requiring precise frequency control with a load capacitance of 20PF and a frequency tolerance of 20ppm.
Product Attributes
- Brand: Kaiyuexiang ()
- Origin: Shenzhen, China
- Product Name: Quartz Crystal Resonator ()
- Product Model: 49USSMD/11.0592MHZ
- Original Manufacturer Model: KBD1105922020
Technical Specifications
| Parameter | Specification |
|---|---|
| General - Holder Type | 49USSMD |
| General - Mode of Vibration | AT CUT |
| General - Oscillation Mode | FUND S&A |
| General - Test Facilities | KH-1240 |
| General - Storage Temperature | -40 TO +85 |
| General - Driver Level | 100W |
| Electrical Parameter - Normal Frequency | 11.0592MHz |
| Electrical Parameter - Frequency Tolerance (252) | 20ppm |
| Electrical Parameter - Temperature Stability | 20ppm |
| Electrical Parameter - Operating Temperature Range | -20 TO +70 |
| Electrical Parameter - Load Capacitance | 20PF |
| Electrical Parameter - Motional Capacitance | 7PF MAX |
| Electrical Parameter - Shunt Capacitance | (Not Specified) |
| Electrical Parameter - Effective Series Resistance | 40 MAX |
| Electrical Parameter - Insulation Resistance | 500M OHMS MIN AT DC 100V |
| Mechanical Parameter - Solderability | 95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. |
| Mechanical Endurance - Shock | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. |
| Mechanical Endurance - Vibration | Frequency: 1055Hz, Period: 12min, Full Amplitude: 1.5mm PP, Direction: X.Y.Z, Time: 2hours/each direction. Electrical characteristics shall be satisfied. |
| Mechanical Endurance - Strength of Terminals/Lead-Wires - Pulling | 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages. |
| Mechanical Endurance - Strength of Terminals/Lead-Wires - Bending | 90-degree bending with 225gs tension weight, then straightened. Repeated to the opposite direction. No visual damages. |
| Mechanical Endurance - Sealing Tightness | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. |
| Mechanical Endurance - Soldering Dip | Terminals/lead-wires dipped into solder at +2305 for 3sec. Dipping depth 2mm from bottom. Over 90% coverage. |
| Mechanical Endurance - Solder Heating | Terminals/lead-wires dipped into solder at +35010 for 3 sec. Electrical characteristics shall be satisfied. |
| Environmental Endurance - Humidity | Electrical characteristics shall be satisfied after 250 hours at 602 in 9095% humidity. |
| Environmental Endurance - Storage in Low Temperature | Electrical characteristics shall be satisfied after 250 hours at -302. |
| Environmental Endurance - Storage in High Temperature | Electrical characteristics shall be satisfied after 250 hours at +852. |
| Environmental Endurance - Temperature Cycle | Electrical characteristics shall be satisfied after 3 cycles. Temperature shift at 1/min. |
2409272303_KYX-KBD1105922020_C2835960.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
