Product Overview
The 49USSMD/13.500MHZ is a Quartz Crystal Resonator manufactured by Shenzhen Kaiyuexiang Industrial Co., Ltd. This product is designed for oscillation and is specified with a load capacitance of 20PF and a frequency tolerance of 20ppm.
Product Attributes
- Brand: (Kaiyuexiang)
- Origin: (Shenzhen)
- Manufacturer: (Shenzhen Kaiyuexiang Industrial Co., Ltd.)
Technical Specifications
| Product Name | Product Model | Frequency | Frequency Tolerance | Load Capacitance | Temperature Stability | Operating Temperature Range | Storage Temperature | Driver Level | Motional Capacitance | Shunt Capacitance | Effective Series Resistance | Insulation Resistance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| (Quartz Crystal Resonator) | 49USSMD/13.500MHZ | 13.500MHz | 20ppm | 20PF | 20ppm | -20TO + 70 | -40TO +85 | 100W | 7PF | MAX 40MAX | 500M OHMS MIN AT DC 100V |
Mechanical Endurance
Shock: Electrical characteristics shall be satisfied after dropping three times from a height of 50 cm onto a hard wooden board.
Vibration: Electrical characteristics shall be satisfied after supplying vibration with frequency 1055Hz, period 12min, full amplitude 1.5mm PP, in X, Y, Z directions for 2 hours/each direction.
Strength of Terminals/Lead-wires:
- Pulling Test: 900g tension weight applied axially to terminals/lead-wires for 30 sec. No visual damages observed.
- Bending Test: 90-degree bending with 225g tension weight, followed by straightening. Repeated in the opposite direction. No visual damages observed.
Sealing Tightness: No gas bubbles observed after specimen is placed in hot water at +90+95 for 5 min.
Soldering Dip: Terminals/lead-wires dipped into solder at +2305 for 3 sec, 2mm from the bottom of the specimen body. Over 90% coverage of dipped terminals/lead-wires.
Solder Heating: Terminals/lead-wires dipped into solder at +35010 for 3-4 sec, 2mm from the edge of terminals/lead-wires. Electrical characteristics shall be satisfied.
Environmental Endurance
Humidity: Electrical characteristics shall be satisfied after 250 hours at 602 with 9095% humidity.
Storage in Low Temperature: Electrical characteristics shall be satisfied after 250 hours at -302.
Storage in High Temperature: Electrical characteristics shall be satisfied after 250 hours at +852.
Temperature Cycle: Electrical characteristics shall be satisfied after 3 cycles of temperature change (low to high, high to low) at a rate of 1/min.
2409272303_KYX-KBD135002020_C2835964.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
