<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Load Capacitance:
15pF
Frequency:
27.1383MHz
Mfr. Part #:
KUS2713A1520
Package:
HC-49S
Key Attributes
Model Number:
KUS2713A1520
Product Description
49US/27.1383MHZ
KUS2713A1520
TEL0755-89315823 89315866 FAX0755-89315223
www.kaiyuexiang.com
49US49US/27.1383MHZ15PF20ppmKUS2713A1520
- (Kaiyuexiang)
| 1. GENERAL | ||
| HOLDING TYPE | 49US | |
| MODE OF VIBRATION | AT CUT | |
| OSCILLATION MODE | FUND S&A | |
| TEST FACILITIES | KH-1240 | |
| STORAGE TEMPERATURE | -40 TO +85 | |
| DRIVER LEVEL | 100W | |
| 2. ELECTRICAL PARAMETER | ||
| NORMAL FREQUENCY | 27.1383 MHz | |
| FREQUENCY TOLERANCE (252) | 20ppm | |
| TEMPERATURE STABILITY | 20ppm | |
| OPERATING TEMPERATURE RANGE | -20 TO +70 | |
| LOAD CAPACITANCE | 15 PF | |
| MOTIONAL CAPACITANCE | 5PF MAX | |
| SHUNT CAPACITANCE | ||
| EFFECTIVE SERIES RESISTANCE | 40 MAX | |
| INSULATION RESISTANCE | 500M OHMS MIN AT DC 100V | |
| 3. MECHANICAL PARAMETER | ||
| SOLDERABILITY | 95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | |
| Mechanical Endurance | ||
| SHOCK | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. | |
| VIBRATION | Frequency: 1055Hz, Period: 12min, Amplitude: 1.5mm PP, Direction: X.Y.Z, Time: 2hours/each direction | Electrical characteristics shall be satisfied after supplying following Vibration. |
| STRENGTH OF TERMINALS/LEADWIRES (PULLING) | 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. | No visual damages on the specimen. |
| STRENGTH OF TERMINALS/LEADWIRES (BENDING) | 90degree bending shall be given, being supplied 225gs tension weight. Then straightened gradually. Same bending and straightening shall be supplied to the opposite direction. | No visual damages on the specimen. |
| SEALING TIGHTNESS | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | |
| SOLDERING DIP | Terminals/lead-wires shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth: 2mm from the bottom of specimens body. (After applying ROSIN flux) Soldering portion shall be covered in over 90% of terminals/lead-wires dipped. | |
| SOLDER HEATING | Terminals/lead-wires shall be dipped into solder melted tank at +35010 for 3 sec. Dipping depth: 2mm from edge of terminals/lead-wires. | Electrical characteristics shall be satisfied. |
| II Environmental Endurance | ||
| HUMIDITY | 602, 9095% RH for 250 hours. | Electrical characteristics shall be satisfied. |
| STORAGE IN LOW TEMPERATURE | -302 for 250 hours. | Electrical characteristics shall be satisfied. |
| STORAGE IN HIGH TEMPERATURE | +852 for 250 hours. | Electrical characteristics shall be satisfied. |
| TEMPERATURE CYCLE | 3 cycles. Temperature shift from low to high, high to low shall be done in 1/min. | Electrical characteristics shall be satisfied. |
2409272230_KYX-KUS2713A1520_C19076840.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
