<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
20pF
Equivalent Series Resistance(ESR):
80Ω
Frequency:
11.0592MHz
Mfr. Part #:
KUS1105922020
Package:
HC-49S
Key Attributes
Model Number:
KUS1105922020
Product Description
- 49US/11.0592MHZ
49US/11.0592MHZ20PF20PPM-20+70
- :
- :
- :
- : 49US/11.0592MHZ
- : KUS1105922020
| (Normal Frequency) | 11.0592MHz |
| (Frequency Tolerance @ 252) | 20ppm |
| (Temperature Stability) | 20ppm |
| (Operating Temperature Range) | -20 to +70 |
| (Load Capacitance) | 20 PF |
| (Driver Level) | 100W |
| (Mode Vibration) | FUND S&A |
| (Oscillation Mode) | 49US AT CUT |
| (Shunt Capacitance) | 7PF MAX |
| (Effective Series Resistance) | 40MAX |
| (Insulation Resistance) | 500M OHMS MIN AT DC 100V |
| (Solderability) | 95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. |
| (Shock) | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board. |
| (Vibration) | Frequency: 1055Hz, Amplitude: 1.5mm PP, Direction: X.Y.Z, Time: 2hours/each direction |
| (Strength of Terminals/Lead-wires) - (Pulling) | 900g tension weight for 30 sec. No visual damages. |
| (Strength of Terminals/Lead-wires) - (Bending) | 90degree bending with 225gs tension weight. No visual damages. |
| (Sealing Tightness) | No gas bubble after specimen put in hot water at +90+95 for 5 min. |
| (Soldering Dip) | Terminals/lead-wires dipped into solder at +2305 for 3sec. Dipping depth 2mm. Over 90% coverage. |
| (Solder Heating) | Electrical characteristics shall be satisfied after dipping in solder at +35010 for 3 sec. |
| (Humidity Endurance) | Electrical characteristics shall be satisfied after 250 hours at 602, 9095% humidity. |
| (Storage in Low Temperature) | Electrical characteristics shall be satisfied after 250 hours at -302. |
| (Storage in High Temperature) | Electrical characteristics shall be satisfied after 250 hours at +852. |
| (Temperature Cycle) | Electrical characteristics shall be satisfied after 3 cycles with temperature shift at 1/min. |
2410121243_KYX-KUS1105922020_C368755.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
