<
>
Specifications
Normal temperature Frequency Tolerance:
±10ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
9pF
Equivalent Series Resistance(ESR):
40Ω
Frequency:
26MHz
Mfr. Part #:
KUS260000910
Package:
HC-49S
Key Attributes
Model Number:
KUS260000910
Product Description
Product Overview
The KAIYUE XIANG 49US/26.000MHZ is a Quartz Crystal Resonator designed for various electronic applications. It offers precise frequency control with a tolerance of 10ppm and a load capacitance of 9PF. This resonator is built to withstand environmental and mechanical stresses, ensuring reliable performance.
Product Attributes
- Brand: KAIYUE XIANG
- Origin: Shenzhen, China
- Product Type: Quartz Crystal Resonator
- Model: 49US/26.000MHZ
- Original Manufacturer Model: KUS260000910
Technical Specifications
| Parameter | Value | Unit | Notes |
| Product Name | Quartz Crystal Resonator | ||
| Product Model | 49US/26.000MHZ | ||
| Product Parameters | 9PF/10PPM | Load Capacitance / Frequency Tolerance | |
| Original Manufacturer Model | KUS260000910 | ||
| Holder Type | 49US | ||
| Mode Vibration | AT CUT | ||
| Oscillation Mode | FUND S&A | ||
| Test Facilities | KH-1240 | ||
| Storage Temperature | -40 to +85 | ||
| Driver Level | 100W | ||
| Normal Frequency | 26.000MHz | ||
| Frequency Tolerance (252) | 10ppm | ||
| Temperature Stability | 20ppm | ||
| Operating Temperature Range | -20 to +70 | ||
| Load Capacitance | 9PF | ||
| Motional Capacitance | 7PF | MAX | |
| Shunt Capacitance | |||
| Effective Series Resistance | 30 | MAX | |
| Insulation Resistance | 500M OHMS | MIN AT DC 100V | |
| Solderability | 95% Coverage by using 90/10 Sold at 245 for 5 sec. Dipping after immersion in ALPHA 611 Flux for 5 sec. | ||
| Shock Test | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. | ||
| Vibration Test | Frequency: 1055Hz, Period: 12min, Full Amplitude: 1.5mm PP, Direction: X.Y.Z, Time: 2hours/each direction | ||
| Strength of Terminals/Lead-Wires (Pulling) | 900g tension weight for 30 sec. No visual damages. | ||
| Strength of Terminals/Lead-Wires (Bending) | 90 degree bending with 225gs tension weight, then straighten. Repeat in opposite direction. No visual damages. | ||
| Sealing Tightness | No gas bubble after specimen put in hot water at +90+95 for 5 min. | ||
| Soldering Dip | Terminals/lead-wires dipped into solder at +2305 for 3sec. Dipping depth 2mm from body. Soldering portion >90%. | ||
| Solder Heating | Terminals/lead-wires dipped into solder at +35010 for 3 sec. Electrical characteristics shall be satisfied. Dipping depth 2mm from edge. | ||
| Humidity Test | Electrical characteristics shall be satisfied after 250 hours at 602 in 9095% humidity. | ||
| Storage in Low Temperature | Electrical characteristics shall be satisfied after 250 hours at -302. | ||
| Storage in High Temperature | Electrical characteristics shall be satisfied after 250 hours at +852. | ||
| Temperature Cycle | Electrical characteristics shall be satisfied after 3 cycles. Temperature shift 1/min. |
2410121243_KYX-KUS260000910_C368774.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
