<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
10pF
Frequency:
12MHz
Mfr. Part #:
K26120001020T
Package:
DT-26
Key Attributes
Model Number:
K26120001020T
Product Description
This specification document details the Quartz Crystal Resonator, Model 2*6/12.000MHZTG, manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. It is designed for applications requiring precise frequency control with a nominal frequency of 12.000 MHz.
Product Attributes
- Brand: Kaiyuexiang
- Origin: Shenzhen, China
- Product Name: Quartz Crystal Resonator
- Product Model: 2*6/12.000MHZTG
- Original Manufacturer Model: K26120001020T
- Factory Address: 4th Floor, Building 1, Caifa Industrial City, Renmin Road, Guanlan, Longhua District, Shenzhen
- Contact: TEL: 0755-89315823 / 89315866, FAX: 0755-89315223
- Website: www.kaiyuexiang.com
Technical Specifications
| Parameter | Value | Conditions |
|---|---|---|
| Case Type | 26 | |
| Vibration Mode | Fundamental | |
| Nominal Frequency | 12.000 MHz | |
| Frequency Tolerance | 20ppm | at 252 |
| Temperature Frequency Drift | 20ppm | |
| Load Capacitance | 10 PF | |
| Resonant Resistance | 80 max | |
| Shunt Capacitance | 3.0pF max | |
| Drive Level | 100W | |
| Annual Aging Rate | 3ppmyear | |
| Insulation Resistance | 500M min | DC10015V |
| Test Instrument | 250B | |
| Free Fall (Shock) | Frequency deviation 5ppm after 3 drops from 35cm onto 2cm thick rubber board | |
| Vibration | Frequency change 20ppm | 10~55Hz, 0.75mm amplitude, 30 min in X, Y, Z directions |
| Temperature Cycling | Appearance without damage; Performance requirements same as vibration | -10 (2~3min) 30min +60 (30min) 30min, 3 cycles |
| Solderability | Tinned surface > 95%; Performance requirements same as vibration | 2355 solder bath for 20.5 sec (2~3.0mm from lead end) |
| Resistance to Soldering Heat | Appearance normal; Performance requirements same as vibration | 250 10 solder bath for 3.50.5 sec (2~2.5mm from lead end) |
| Low Temperature Resistance | Performance requirements same as vibration | -253 for 2 hours, then 2 hours at room temperature recovery |
| High Temperature Resistance | Performance requirements same as vibration | +702 for 2 hours, then 2 hours at room temperature recovery |
| Constant Humidity Heat | Appearance normal; Performance requirements same as vibration | 403, RH932 for 48 hours, then 2 hours recovery |
| High Temperature Aging | Frequency change 5ppm; Resistance change 25 | 1202 for 48 hours, then 2 hours at room temperature recovery |
2310101742_KYX-K26120001020T_C18208965.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
