<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Frequency Stability:
±20ppm
Load Capacitance:
22pF
Operating Temperature:
-20℃~+70℃
Frequency:
12MHz
Mfr. Part #:
KBD120002220
Package:
HC-49S-SMD
Key Attributes
Model Number:
KBD120002220
Product Description
Product Overview
This specification sheet details the HC-49USSMD/12.000 MHZ Quartz Crystal Resonator manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. It is designed for applications requiring precise frequency control.
Product Attributes
- Brand: Kaiyuexiang
- Origin: Shenzhen, China
- Product Name: Quartz Crystal Resonator
- Product Model: HC-49USSMD/12.000 MHZ
- Original Model: KBD120002220
Technical Specifications
| Parameter | Value | Unit | Notes |
|---|---|---|---|
| Normal Frequency | 12.000 | MHz | |
| Frequency Tolerance (252) | 20 | ppm | |
| Temperature Stability | 20 | ppm | |
| Operating Temperature Range | -20 to +70 | ||
| Load Capacitance | 22 | PF | |
| Motional Capacitance | 3 | PF | MAX |
| Shunt Capacitance | |||
| Effective Series Resistance | 80 | MAX | |
| Insulation Resistance | 500 | M OHMS | MIN AT DC 100V |
| Holder Type | HC-49USSMD | AT CUT | |
| Mode of Vibration | FUND | ||
| Oscillation Mode | S&A | KH-1240 | |
| Test Facilities | -40TO +85 | STORAGE TEMPERATURE | |
| Driver Level | 100 | W | |
| Solderability | 95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | ||
| Shock Resistance | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. | ||
| Vibration Resistance | Frequency: 1055Hz, Period: 12min, Full Amplitude: 1.5mm PP, Direction: X.Y.Z, Time: 2 hours/each direction | Electrical characteristics shall be satisfied after supplying following Vibration. | |
| Strength of Terminals/Lead-Wires (Pulling) | 900g tension weight for 30 sec. | No visual damages after test. | |
| Strength of Terminals/Lead-Wires (Bending) | 90 degree bending with 225gs tension weight. | No visual damages after test. | |
| Sealing Tightness | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | ||
| Soldering Dip | Terminals/lead-wires dipped into solder at +2305 for 3sec. Dipping depth 2mm from bottom of body. Soldering portion over 90%. | (After applying ROSIN flux) | |
| Solder Heating | Terminals/lead-wires dipped into solder at +35010 for 3 sec. Dipping depth 2mm from edge of terminals/lead-wires. | Electrical characteristics shall be satisfied after dipping. | |
| Humidity Resistance | Electrical characteristics shall be satisfied after 250 hours at 602 in 90-95% humidity. | ||
| Storage in Low Temperature | Electrical characteristics shall be satisfied after 250 hours at -302. | ||
| Storage in High Temperature | Electrical characteristics shall be satisfied after 250 hours at +852. | ||
| Temperature Cycle | Electrical characteristics shall be satisfied after 3 cycles. Temperature shift 1/min. | (Refer to Fig-2) |
2409272302_KYX-KBD120002220_C18209142.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
