<
>
Specifications
Normal temperature Frequency Tolerance:
±10ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
20pF
Frequency:
24MHz
Mfr. Part #:
KBD240002010
Package:
HC-49S-SMD
Key Attributes
Model Number:
KBD240002010
Product Description
HC-49USSMD/24.000 MHZ
KBD240002010
20PF/10ppm
0755-89315823 / 89315866
0755-89315223
www.kaiyuexiang.com
| 1. GENERAL | ||
| HOLDER TYPE | HC-49USSMD | |
| MODE OF VIBRATION | FUND | |
| OSCILLATION MODE | S&A | |
| TEST FACILITIES | KH-1240 | |
| STORAGE TEMPERATURE | -40 TO +85 | |
| DRIVER LEVEL | 100W | |
| 2. ELECTRICAL PARAMETER | ||
| NORMAL FREQUENCY | 24.000 MHz | |
| FREQUENCY TOLERANCE (252) | 10ppm | |
| TEMPERATURE STABILITY | 20ppm | |
| OPERATING TEMPERATURE RANGE | -20 TO +70 | |
| LOAD CAPACITANCE | 20 PF | |
| MOTIONAL CAPACITANCE | 3pF MAX | |
| SHUNT CAPACITANCE | ||
| EFFECTIVE SERIES RESISTANCE | 40 MAX | |
| INSULATION RESISTANCE | 500M OHMS MIN AT DC 100V | |
| 3. MECHANICAL PARAMETER | ||
| SOLDERABILITY | 95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. | DIPPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. |
| MECHANICAL ENDURANCE | ||
| SHOCK | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. | |
| VIBRATION | Electrical characteristics shall be satisfied after supplying following Vibration. | (1)VIBRATION FREQUENCY: 1055Hz (2)REPEATED PERIOD: 12min (3)FULL CYCLE: 1.5mm PP (4)DIRECTION: X.Y.Z (5)TIME: 2hours/each direction |
| STRENGTH OF TERMINALS/LEAD-WIRES | PULLING: 900g tension weight for 30 sec. No visual damages. | BENDING: 90 degree bending with 225gs tension weight. No visual damages. |
| SEALING TIGHTNESS | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | |
| SOLDERING DIP | Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from body. Soldering portion over 90% coverage. | (After applying ROSIN flux) |
| SOLDER HEATING | Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied. Dipping depth 2mm from edge. | |
| ENVIRONMENTAL ENDURANCE | ||
| HUMIDITY | Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours. | |
| STORAGE IN LOW TEMPERATURE | Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours. | |
| STORAGE IN HIGH TEMPERATURE | Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours. | |
| TEMPERATURE CYCLE | Electrical characteristics shall be satisfied after supplying the following temperature cycle (3 cycles). Temperature shift 1/min. | (Refer to Fig-2) |
2409272302_KYX-KBD240002010_C18209155.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
