<
>
Specifications
Normal temperature Frequency Tolerance:
±30ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
16pF
Equivalent Series Resistance(ESR):
40Ω
Frequency:
24MHz
Mfr. Part #:
KSD240001630
Package:
HC-49S-SMD
Key Attributes
Model Number:
KSD240001630
Product Description
HC-49USSMD/24.000 MHZ
KSD240001630
16PF/30ppm
TEL0755-89315823 89315866 FAX0755-89315223
www.kaiyuexiang.com
HC-49USSMD
| 1. GENERAL | ||
| HOLDER TYPE | HC-49USSMD | - |
| MODE OF VIBRATION | AT CUT | FUND |
| OSCILLATION MODE | S&A | KH-1240 |
| TEST FACILITIES | - | - |
| STORAGE TEMPERATURE | -40TO +85 | - |
| DRIVER LEVEL | 100W | - |
| 2. ELECTRICAL PARAMETER | ||
| NORMAL FREQUENCY | 24.000 MHz | - |
| FREQUENCY TOLERANCE252 | 30ppm | - |
| TEMPERATURE STABILITY | 20ppm | - |
| OPERATING TEMPERATURE RANGE | -20TO + 70 | - |
| LOAD CAPACITANCE | 16 PF | - |
| MOTIONAL CAPACITANE | 5PF MAX | - |
| SHUNT CAPACITANCE | 40MAX | - |
| EFFECTIVE SERIES RESISTANCE | 500M OHMS MIN AT DC 100V | - |
| INSULATION RESISTANCE | - | - |
| 3. MECHANICAL PARAMETER | ||
| SOLDERABILITY | 95%COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | - |
| MECHANICAL ENDURANCE | ||
| SHOCK | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board. | - |
| VIBRATION | VIBRATION FREQUENCY: 1055Hz REPEATED PERIOD: 12min FULL CYCLE: 1.5mm PP DIRECTION: X.Y.Z TIME: 2hours/each direction | Electrical characteristics shall be satisfied after supplying following Vibration. |
| STRENGTH OF TERMINALS/LEADWIRES | PULLING: 900g tension weight for 30 sec. BENDING: 90degree bending with 225gs tension weight. | Electrical characteristics shall be satisfied after test. No visual damages. |
| SEALING TIGHTNESS | No observation of gas bubble after specimen put in hot water at +90+95for 5 min. | - |
| SOLDERING DIP | Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from bottom of body. (After applying ROSIN flux) Soldering portion over 90% coverage. | - |
| SOLDER HEATING | Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec. Dipping depth 2mm from edge of terminals/lead-wires. | Electrical characteristics shall be satisfied after dipping. |
| ENVIRONMENTAL ENDURANCE | ||
| HUMIDITY | 602, 9095% humidity for 250 hours. | Electrical characteristics shall be satisfied. |
| STORAGE IN LOW TEMPERATURE | -302 for 250 hours. | Electrical characteristics shall be satisfied. |
| STORAGE IN HIGH TEMPERATURE | +852 for 250 hours. | Electrical characteristics shall be satisfied. |
| TEMPERATURE CYCLE | 3 cycles. Temperature shift 1/min. | Electrical characteristics shall be satisfied. |
2409272302_KYX-KSD240001630_C18213251.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
