<
>
Specifications
Normal temperature Frequency Tolerance:
±30ppm
Frequency Stability:
±20ppm
Load Capacitance:
12pF
Operating Temperature:
-20℃~+70℃
Equivalent Series Resistance(ESR):
60Ω
Frequency:
16MHz
Mfr. Part #:
KUS160001230
Package:
HC-49S
Key Attributes
Model Number:
KUS160001230
Product Description
- HC-49SJJ/16.000MHZ
HC-49SJJ/16.000MHZ
- : (Kaiyuexiang)
- :
- : HC-49SJJ/16.000MHZ
- : KUS160001230
| Quartz Crystal Resonator | ||
| HC-49SJJ/16.000MHZ | ||
| 12PF/30ppm | ||
| KUS160001230 | ||
| Holder Type | 49US AT CUT | |
| Mode of Vibration | FUND S&A | |
| Oscillation Mode | KH-1240 | |
| Test Facilities | ||
| Storage Temperature | -40 TO +85 | |
| Driver Level | 100W | |
| Normal Frequency | 16.000 MHz | |
| Frequency Tolerance (252) | 30ppm | (252) |
| Temperature Stability | 20ppm | |
| Operating Temperature Range | -20 TO +70 | |
| Load Capacitance | 12 PF | |
| Motional Capacitance | 3PF MAX | |
| Shunt Capacitance | ||
| Effective Series Resistance | 60 MAX | |
| Insulation Resistance | 500M OHMS MIN AT DC 100V | |
| Solderability | 95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | |
| Shock | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board. | : 50cm3 |
| Vibration | Frequency: 1055Hz, Period: 12min, Amplitude: 1.5mm PP, Direction: X.Y.Z, Time: 2hours/each direction | : 1055Hz, 12min, 1.5mm PP, X.Y.Z, 2/ |
| Strength of Terminals/Lead-wires - Pulling | 900g tension weight for 30 sec. No visual damages. | - : 900g30 |
| Strength of Terminals/Lead-wires - Bending | 90 degree bending with 225gs tension weight. No visual damages. | - : 90225g |
| Sealing Tightness | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | : +90+955 |
| Soldering Dip | Terminals/lead-wires dipped into solder at +2305 for 3 sec. Dipping depth 2mm from body. Over 90% coverage. (After applying ROSIN flux) | : +230532mm90% |
| Solder Heating | Terminals/lead-wires dipped into solder at +35010 for 3 sec. Electrical characteristics shall be satisfied. Dipping depth 2mm from edge. | : +350103 |
| Humidity | Electrical characteristics shall be satisfied after 250 hours at 602 in humidity of 9095%. | : 602, 9095%250 |
| Storage in Low Temperature | Electrical characteristics shall be satisfied after 250 hours at -302. | : -302250 |
| Storage in High Temperature | Electrical characteristics shall be satisfied after 250 hours at +852. | : +852250 |
| Temperature Cycle | Electrical characteristics shall be satisfied after 3 cycles. Temperature shift 1/min. | : 31/min |
2409272230_KYX-KUS160001230_C18213293.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
