<
>
Specifications
Normal temperature Frequency Tolerance:
±30ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
20pF
Frequency:
6.7458MHz
Mfr. Part #:
KBD674582030
Package:
HC-49S-SMD
Key Attributes
Model Number:
KBD674582030
Product Description
HC-49USSMD/6.7458 MHZ
20PF/30ppm
KBD674582030
- (Kaiyuexiang)
- 0755-89315823 / 89315866
- 0755-89315223
- www.kaiyuexiang.com
| Holder Type | HC-49USSMD | ||
| Mode of Vibration | AT CUT | ||
| Oscillation Mode | FUND S&A | ||
| Test Facilities | KH-1240 | ||
| Storage Temperature | -40 to +85 | ||
| Driver Level | 100 | W | |
| Normal Frequency | 6.7458 | MHz | |
| Frequency Tolerance (252) | 30 | ppm | |
| Temperature Stability | 20 | ppm | |
| Operating Temperature Range | -20 to +70 | ||
| Load Capacitance | 20 | PF | |
| Motional Capacitance | 3 | PF | MAX |
| Shunt Capacitance | |||
| Effective Series Resistance | 250 | MAX | |
| Insulation Resistance | 500 | M OHMS | MIN AT DC 100V |
| Solderability | 95% Coverage by using 90/10 Sold at 245 for 5 sec. Dipping after immersion in ALPHA 611 flux for 5 sec. | ||
| Shock Resistance | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. | ||
| Vibration Resistance | Frequency: 10-55Hz, Period: 1-2min, Full Amplitude: 1.5mm P-P, Direction: X,Y,Z, Time: 2 hours/each direction | ||
| Strength of Terminals/Lead-wires (Pulling) | 900g tension weight for 30 sec. No visual damages. | ||
| Strength of Terminals/Lead-wires (Bending) | 90-degree bending with 225g tension weight, then straighten. Repeat in opposite direction. No visual damages. | ||
| Sealing Tightness | No gas bubble after specimen put in hot water at +90+95 for 5 min. | ||
| Soldering Dip | Dipped into solder melted tank at +2305 for 3 sec. Dipping depth 2mm from bottom of specimens body. (After applying ROSIN flux) Soldering portion shall be covered in over 90% of terminals/lead-wires dipped. | ||
| Solder Heating | Dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied. Dipping depth 2mm from edge of terminals/lead-wires. | ||
| Humidity Resistance | Electrical characteristics shall be satisfied after 250 hours at 602 in 90-95% humidity. | ||
| Storage in Low Temperature | Electrical characteristics shall be satisfied after 250 hours at -302. | ||
| Storage in High Temperature | Electrical characteristics shall be satisfied after 250 hours at +852. | ||
| Temperature Cycle | Electrical characteristics shall be satisfied after 3 cycles. Temperature shift at 1/min. |
2409272302_KYX-KBD674582030_C18209133.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
