<
>
Specifications
Normal temperature Frequency Tolerance:
±30ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
20pF
Equivalent Series Resistance(ESR):
60Ω
Frequency:
13.56MHz
Mfr. Part #:
KSB135602030
Package:
HC-49S-SMD
Key Attributes
Model Number:
KSB135602030
Product Description
49USSSMD/13.560MHZ
- : (Kaiyuexiang)
- :
- :
- : 49USSSMD/13.560MHZ
- : KSB135602030
| (Normal Frequency) | 13.560 | MHz | |
| (Frequency Tolerance @ 252) | 30 | ppm | |
| (Temperature Stability) | 20 | ppm | |
| (Operating Temperature Range) | -20 to +70 | ||
| (Load Capacitance) | 20 | PF | |
| (Motional Capacitance) | 7 | PF | MAX |
| (Effective Series Resistance) | 80 | MAX | |
| (Insulation Resistance) | 500 | M OHMS | MIN @ DC 100V |
| (Driver Level) | 100 | W | |
| (Mode of Vibration) | FUND S&A | KH-1240 | |
| (Oscillation Mode) | AT CUT | ||
| (Holder Type) | 49USSSMD | ||
| (Storage Temperature) | -40 to +85 | ||
| (Solderability) | 95% Coverage by using 90/10 Sold at 245 for 5 sec. Dipping after immersion in ALPHA 611 flux for 5 sec. | ||
| (Shock) | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. | ||
| (Vibration) | Frequency: 10-55Hz, Amplitude: 1.5mm P-P, Duration: 2 hours/each direction (X.Y.Z) | Electrical characteristics shall be satisfied. | |
| - (Strength of Terminals/Lead-wires - Pulling) | 900g tension weight for 30 sec. | No visual damages. | |
| - (Strength of Terminals/Lead-wires - Bending) | 90 degree bending with 225g tension weight. | No visual damages. | |
| (Sealing Tightness) | No gas bubble after specimen put in hot water at +90+95 for 5 min. | ||
| (Soldering Dip) | Dipped into solder melted tank at +2305 for 3 sec. Depth: 2mm from bottom of body. Soldering portion >90% coverage. | (After applying ROSIN flux) | |
| (Solder Heating) | Dipped into solder melted tank at +35010 for 3-4 sec. Depth: 2mm from edge of terminals/lead-wires. | Electrical characteristics shall be satisfied. | |
| (Humidity) | Electrical characteristics shall be satisfied after 250 hours at 602, 90-95% RH. | ||
| (Storage in Low Temperature) | Electrical characteristics shall be satisfied after 250 hours at -302. | ||
| (Storage in High Temperature) | Electrical characteristics shall be satisfied after 250 hours at +852. | ||
| (Temperature Cycle) | Electrical characteristics shall be satisfied after 3 cycles. Temperature shift rate: 1/min. | (Refer to Fig-2) |
2409272302_KYX-KSB135602030_C18213230.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
