<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
10pF
Equivalent Series Resistance(ESR):
40Ω
Frequency:
25MHz
Mfr. Part #:
KSD250001020
Package:
HC-49S-SMD
Key Attributes
Model Number:
KSD250001020
Product Description
Product Overview
The HC-49USSMD/25.000 MHZ is a Quartz Crystal Resonator manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. It is designed for applications requiring precise frequency control.
Product Attributes
- Brand: Kaiyuexiang
- Origin: Shenzhen, China
- Model: HC-49USSMD/25.000 MHZ
- Original Manufacturer Model: KSD250001020
Technical Specifications
| Parameter | Value | Unit | Notes |
| Product Name | Quartz Crystal Resonator | ||
| Product Model | HC-49USSMD/25.000 MHZ | ||
| Product Parameters | 10PF/20ppm | ||
| Normal Frequency | 25.000 | MHz | |
| Frequency Tolerance (252) | 20 | ppm | |
| Temperature Stability | 20 | ppm | |
| Operating Temperature Range | -20 to +70 | ||
| Load Capacitance | 10 | PF | |
| Motional Capacitance | 5 | PF MAX | |
| Shunt Capacitance | |||
| Effective Series Resistance | 40 | MAX | |
| Insulation Resistance | 500 | M OHMS MIN | AT DC 100V |
| Holder Type | HC-49USSMD | AT CUT | |
| Mode of Vibration | FUND | S&A KH-1240 | |
| Oscillation Mode | |||
| Test Facilities | |||
| Storage Temperature | -40 to +85 | ||
| Driver Level | 100 | W | |
| Solderability | 95% Coverage by using 90/10 Sold at 245 for 5 sec. Dipping after immersion in ALPHA 611 flux for 5 sec. | ||
| Mechanical Endurance - Shock | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. | ||
| Mechanical Endurance - Vibration | Frequency: 1055Hz, Period: 12min, Full Amplitude: 1.5mm PP, Direction: X.Y.Z, Time: 2 hours/each direction | ||
| Mechanical Endurance - Strength of Terminals/Lead-Wires - Pulling | 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages. | ||
| Mechanical Endurance - Strength of Terminals/Lead-Wires - Bending | 90degree bending with 225gs tension weight. No visual damages. | ||
| Mechanical Endurance - Sealing Tightness | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | ||
| Mechanical Endurance - Soldering Dip | Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth: 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90%. | (After applying ROSIN flux) | |
| Mechanical Endurance - Solder Heating | Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied. Dipping depth: 2mm from edge of terminals/lead-wires. | ||
| Environmental Endurance - Humidity | Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours. | ||
| Environmental Endurance - Storage in Low Temperature | Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours. | ||
| Environmental Endurance - Storage in High Temperature | Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours. | ||
| Environmental Endurance - Temperature Cycle | Electrical characteristics shall be satisfied after supplying the following temperature cycle (3 cycles). Temperature shift: 1/min. | (Refer to Fig-2) |
2409272302_KYX-KSD250001020_C18213258.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
