<
>
Specifications
Normal temperature Frequency Tolerance:
±30ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
20pF
Frequency:
14.31818MHz
Mfr. Part #:
KBD1431A2030
Package:
HC-49S-SMD
Key Attributes
Model Number:
KBD1431A2030
Product Description
Product Overview
The HC-49USSMD/14.31818 MHZ is a Quartz Crystal Resonator manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. It features a product model of HC-49USSMD and a nominal frequency of 14.31818 MHz, with a frequency tolerance of 30ppm and a load capacitance of 20PF.
Product Attributes
- Brand: (Kaiyuexiang)
- Origin: Shenzhen, China
- Certifications: Not specified
Technical Specifications
| Parameter | Value | Unit | Notes |
| Product Name | Quartz Crystal Resonator | ||
| Product Model | HC-49USSMD | ||
| Nominal Frequency | 14.31818 | MHz | |
| Frequency Tolerance (252) | 30 | ppm | |
| Temperature Stability | 20 | ppm | |
| Operating Temperature Range | -20 to +70 | ||
| Load Capacitance | 20 | PF | |
| Motional Capacitance | 3 | PF MAX | |
| Shunt Capacitance | Not specified | ||
| Effective Series Resistance | 80 | MAX | |
| Insulation Resistance | 500 | M OHMS MIN | AT DC 100V |
| Holder Type | HC-49USSMD | AT CUT | |
| Mode of Vibration | FUND | S&A KH-1240 | |
| Oscillation Mode | S&A | KH-1240 | |
| Storage Temperature | -40 to +85 | ||
| Driver Level | 100 | W | |
| Solderability | 95% Coverage by using 90/10 Sold at 245 for 5 sec. Dipping after immersion in ALPHA 611 flux for 5 sec. | ||
| Shock Test | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. | ||
| Vibration Test | Frequency: 1055Hz, Period: 12min, Full Amplitude: 1.5mm P-P, Direction: X.Y.Z, Time: 2 hours/each direction | ||
| Strength of Terminals/Lead-wires (Pulling) | 900g tension weight for 30 sec. | No visual damages after test. | |
| Strength of Terminals/Lead-wires (Bending) | 90degree bending, 225gs tension weight, straightened gradually. Repeated in opposite direction. | No visual damages after test. | |
| Sealing Tightness | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | ||
| Soldering Dip | Terminals/lead-wires dipped into solder melted tank at +2305 for 3 sec. Dipping depth: 2mm from bottom of specimens body. Soldering portion: over 90% of terminals/lead-wires dipped. | (After applying ROSIN flux) | |
| Solder Heating | Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec. | Electrical characteristics shall be satisfied. Dipping depth: 2mm from edge of terminals/lead-wires. | |
| Humidity Test | Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours. | ||
| Storage in Low Temperature | Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours. | ||
| Storage in High Temperature | Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours. | ||
| Temperature Cycle | Electrical characteristics shall be satisfied after supplying the following temperature cycle (3 cycles). Temperature shift: 1/min. | (Refer to Fig-2) |
2409272302_KYX-KBD1431A2030_C18209147.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
