<
>
Specifications
Normal temperature Frequency Tolerance:
±30ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
20pF
Equivalent Series Resistance(ESR):
250Ω
Frequency:
8MHz
Mfr. Part #:
KSS800002030
Package:
HC-49S
Key Attributes
Model Number:
KSS800002030
Product Description
HC-49SSJJ/8.000MHZ
- : (Kaiyuexiang)
- :
- :
- : HC-49SSJJ/8.000MHZ
- : KSS800002030
| GENERAL | ||
| HOLDER TYPE | 49USS AT CUT | |
| MODE OF VIBRATION | FUND S&A | |
| OSCILLATION MODE | KH-1240 | |
| TEST FACILITIES | ||
| STORAGE TEMPERATURE | -40TO +85 | |
| DRIVER LEVEL | 100W | |
| ELECTRICAL PARAMETER | ||
| NORMAL FREQUENCY | 8.000 MHz | |
| FREQUENCY TOLERANCE252 | 30ppm | |
| TEMPERATURE STABILITY | 20ppm | |
| OPERATING TEMPERATURE RANGE | -20TO +70 | |
| LOAD CAPACITANCE | 20 PF | |
| MOTIONAL CAPACITANE | 7PF MAX | |
| SHUNT CAPACITANCE | ||
| EFFECTIVE SERIES RESISTANCE | 250MAX | |
| INSULATION RESISTANCE | 500M OHMS MIN AT DC 100V | |
| MECHANICAL PARAMETER | ||
| SOLDERABILITY | 95%COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | |
| MECHANICAL ENDURANCE | ||
| SHOCK | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board. | |
| VIBRATION | (1)VIBRATION FREQUENCY 1055Hz (2)REPEATED PERIOD 12min (3)FULL CYCLE 1.5mm PP (4)DIRECTION X.Y.Z (5)TIME 2hours/each direction | Electrical characteristics shall be satisfied after supplying following Vibration. |
| STRENGTH OF TERMINALS/LEADWIRES | -1 PULLING: 900g tension weight for 30 sec. -2 BENDING: 90degree bending with 225gs tension weight. | No visual damages after test. |
| SEALING TIGHTNESS | No observation of gas bubble after specimen put in hot water at +90+95for 5 min. | |
| SOLDERING DIP | Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped. | (After applying ROSIN flux) |
| SOLDER HEATING | Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec. Dipping depth 2mm from edge of terminals/lead-wires. | Electrical characteristics shall be satisfied after dipping. |
| ENVIRONMENTAL ENDURANCE | ||
| HUMIDITY | 602, 9095% humidity for 250 hours. | Electrical characteristics shall be satisfied after test. |
| STORAGE IN LOW TEMPERATURE | -302 for 250 hours. | Electrical characteristics shall be satisfied after test. |
| STORAGE IN HIGH TEMPERATURE | +852 for 250 hours. | Electrical characteristics shall be satisfied after test. |
| TEMPERATURE CYCLE | 3 cycles. Temperature shift from low to high, high to low shall be done in 1/min. | Electrical characteristics shall be satisfied after test. |
:
TEL0755-89315823 / 89315866
FAX0755-89315223
www.kaiyuexiang.com
2409272303_KYX-KSS800002030_C18213275.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
