<
>
Specifications
Normal temperature Frequency Tolerance:
±30ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
20pF
Frequency:
26MHz
Mfr. Part #:
KBD260002030
Package:
HC-49S-SMD
Key Attributes
Model Number:
KBD260002030
Product Description
HC-49USSMD/26.000 MHZ20PF/30ppmKBD260002030
- : (Kaiyuexiang)
- :
- :
- : HC-49USSMD/26.000 MHZ
- : KBD260002030
| Holder Type | HC-49USSMD | ||
| Mode of Vibration | AT CUT | ||
| Oscillation Mode | FUND | ||
| Test Facilities | S&A KH-1240 | ||
| Storage Temperature | -40 to +85 | ||
| Driver Level | 100 | W | |
| Normal Frequency | 26.000 | MHz | |
| Frequency Tolerance (252) | 30 | ppm | |
| Temperature Stability | 20 | ppm | |
| Operating Temperature Range | -20 to +70 | ||
| Load Capacitance | 20 | PF | |
| Motional Capacitance | 3 | PF | MAX |
| Shunt Capacitance | |||
| Effective Series Resistance | 40 | MAX | |
| Insulation Resistance | 500 | M OHMS | MIN AT DC 100V |
| Solderability | 95% Coverage by using 90/10 Sold at 245 for 5 sec. Dipping after immersion in ALPHA 611 flux for 5 sec. | ||
| Mechanical Endurance - Shock | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. | ||
| Mechanical Endurance - Vibration | Frequency: 1055Hz, Period: 12min, Full Amplitude: 1.5mm P-P, Direction: X.Y.Z, Time: 2 hours/each direction | ||
| Mechanical Endurance - Strength of Terminals/Lead-wires - Pulling | 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages. | ||
| Mechanical Endurance - Strength of Terminals/Lead-wires - Bending | 90 degree bending with 225gs tension weight. No visual damages. | ||
| Mechanical Endurance - Sealing Tightness | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | ||
| Mechanical Endurance - Soldering Dip | Terminals/lead-wires dipped into solder melted tank at +2305 for 3 sec. Dipping depth 2mm from bottom of specimens body. Soldering portion over 90% coverage. | ||
| Mechanical Endurance - Solder Heating | Terminals/lead-wires dipped into solder melted tank at +35010 for 3-4 sec. Electrical characteristics shall be satisfied. Dipping depth 2mm from edge of terminals/lead-wires. | ||
| Environmental Endurance - Humidity | Electrical characteristics shall be satisfied after 250 hours at 602 in humidity of 9095%. | ||
| Environmental Endurance - Storage in Low Temperature | Electrical characteristics shall be satisfied after 250 hours at -302. | ||
| Environmental Endurance - Storage in High Temperature | Electrical characteristics shall be satisfied after 250 hours at +852. | ||
| Environmental Endurance - Temperature Cycle | Electrical characteristics shall be satisfied after 3 cycles. Temperature shift 1/min. |
:
TEL0755-89315823 89315866
FAX0755-89315223
www.kaiyuexiang.com
2409272302_KYX-KBD260002030_C18209160.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
